Quick Question!

Have you ever purchased from PartSelect.com before?

247415-1-S-GE-WB36X192          -Light Cover
247415-1-S-GE-WB36X192          -Light Cover 247415-2-S-GE-WB36X192          -Light Cover http://www.partselect.com/Schematics/GE/00115502i02.gif

Light Cover

PartSelect Number PS247415

This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it needs to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.

This part works with the following brands: GE, Hotpoint & KENMORE®.

Compare At

$6.36

You Save

$1.06

Your Price

$5.30
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

BAIL

Part Number 242672

$2.10
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Edward from Ashland, MA

I tried to remove oven light and got a spark that took out the control panel.

Oven light was easy - Snapped the Wire Bail, removed the Glass Protect and removed the buld. Installed new bulb, installed Glass Protect and snapped the Wire Bail. The Control Panel was a little harder and had to remove the 4 screws holding the metal Back Plate cover. I wrote down all the wire connections and then unplugged the wires. I took a 1/4 nutdriver and removed 4 screws holding Control panel in place and removed the Panel. The new control panel did not come with the Switch Face Plate so I removed the old one with a razor blade. The Switch Face Plate had plenty of adhessive so I just aligned the Face Plate with the Control Panel and seated it in place - thankfully it held firmly. I installed the Control Panel with Face Plate into the range and secured it with 4 screws using nutdriver. I plugged the wire connectors into the Control Panel and installed the Metal Back Plate to the range and secured it with 4 screws. Plugged the Range into the sockets and checked it for operation. Everything worked Ok including the new oven light.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Socket set
Customer: brian from nashua, NH

Oven igniter burnt out

removed the old one went to plug in the new one but plug wasnt the same so i cut the old plug off and attched it to the new igniter with the wire nuts sent with the part and it works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2