The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notice that this part is cracked or broken and will need to be replaced. You will need to remove the screw holding the cover in place. Unhook the cover from the bottom panel. Bend the tabs up that are securing the old lens in place. The textured side should be facing up. Place the new lens into place and secure back into place.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave, Microwave Oven Combo, Range.
This part works with the following products:
General Electric, Hotpoint.
Part# WB36X10071 replaces these:
AP2030060, 259723, WB36X0945, WB36X945
Customer Reviews
Average Rating:
★★★★★
★★★★★
23 Reviews
4.7
Filter By Rating:
5 Stars
21
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
PEDRO D - March 17, 2022
Verified Purchase
Perfect. Fit was exact
Thank you
★★★★★
★★★★★
Charles M - January 21, 2022
Verified Purchase
As required
Fasr delivery, as specified.
★★★★★
★★★★★
Christi A - November 18, 2021
Verified Purchase
Easy to install
The part I ordered was the glass lens that covers the light bulb on my microwave. It was carefully wrapped, no chance of breaking in transit. It was easy to install. Took less than a minute.
★★★★★
★★★★★
Gilbert G - September 18, 2021
Verified Purchase
Worked great
Easy repair and perfect fit.
★★★★★
★★★★★
Norma M - September 9, 2021
Verified Purchase
Easy
Glass light cover under microwave
★★★★★
★★★★★
Jennie L N - June 27, 2021
Verified Purchase
glass panel
gpt it quickly was well packed
★★★★★
★★★★★
Georgine R - April 7, 2021
Verified Purchase
Easy repair
The part is exactly what I needed. I am so glad to find a reputable business which can supply these parts. Easy to order. Arrived quickly.
★★★★★
★★★★★
Joel J S - March 27, 2021
Verified Purchase
Easy Fix for anyone.
Glass was well protected from damage. Once unwrapped, and removing the old damaged one, this one slid into place easily!
Instructions were very simple too.
★★★★★
★★★★★
Walter T - March 9, 2021
Verified Purchase
Right Part at the Right Time
My order for a replacement glass light lens for my microwave perfectly matched and was promptly delivered. Ordering was very easy and descriptions were accurate such that I had confidence in what was being ordered.
Great purchasing experience!!!
★★★★★
★★★★★
Elizabeth M - September 24, 2020
Verified Purchase
Very easy to replace.
Perfect.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 21 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light in Microwave burnd out glas broken over lights
Easy peasy - removed lens holder w/screw driver. Cleaned cover after removing damaged glass lens. Then unscrewed burnt out light bulbs. Installed new bulbs, slid in new light lens into holder and screwed back into bottom of microwave. Removed greasy filter and slid in new filter. Done!
I first read the previously posted directions from other customers that were sent with my part order confirmation, which were all very helpful. Then, I basically used a screw driver to unscrew the screw holding the lens cover in place - be careful as it is a very tiny screw and it can easily fall behind your oven. You might want to place
... Read morea large piece of cardboard over the space between oven and wall, as I did, so that you don't lose the screw in case it falls. Next I pried open the prongs, carefully slid out the cracked lens, and slid the new lens in place, pushed back the prongs and put the screw back in. I found that it was easier to use my fingers to first place and tighten the screw because it is very small and will keep falling out of place if you try to just use the screwdriver. Good luck!
Read less
Marion from GILBERTSVILLE, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass lens and two light bulbs replacements
My microwave is built in above the stove which provides lighting and fans for my stove. The glass lens cover for the lighting was cracked in several places and the light bulbs had burned out. I taped the glass lens for removal so it didn't break apart due to the cracks Removed the one screw. .Both light bulbs broke away from the base sock
... Read moreets as I tried to unscrew them. I used electrical tape wrapping in reverse on a lightbulb (socket end) so it was sticky for a grip on the base, shoved it in the sockets and was unable to unscrew the broke off bases. So it was very successful and no repair man was needed.
I usually replace the charcoal filter in the Microwave one every 3 months. this light out looked confusing and complicated at first, however I was surprised how easy it was when you have proper tools and directions from fellow Do It Yourselfers.
All one has to do is use a screw driver to remove the screws, one per lens. Then lower the lens bracket, bend the 4 tabs holding the lens, remove and replace the lens and screw the brackets back in place.
Less than 10 minuits.
Hugh from Slippery Rock, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken light lens for the light bulbs
Took the screw out of the glass door holder, bent the clips up and removed the broken glass. While this was open chenged the light bulbs as well. Put new glass in bent the holding clips down and closed the doors and installed the screws again. So nice to have good light again and also new glass in them. Never noticed they were broken befo
... Read morere.
BY THE WAY PARTS SELECT IS VERY PROMPT AND I RECEIVED MY PARTS IN ONE DAY AFTER THEY SHIPPED. SHIPPED ON MONDAY GOT THEM TUESDAY, thanks parts select for your promtness and speedy work for shipment.
Read less
TERRELL from OAK POINT, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light bulb was burnt out and lens was broken
Unscrewed the lens, it hinged down, then I could remove the frame. Pulled old bulb out and replaced with new one. Replaced broken glass in frame. Reset hinge into the holes and swung it up into place. Screwed it in.
Lens Was Not Sized To Fit And Was Left Extremely Sharp
Had to take to a local glass shop for sizing and to remove sharp edges. Will never order again.
robert from salmon, ID
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken light lense
Removed one screw, installed new lense in lense frame, rescrewed. Done.
George from Marana, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patty
November 16, 2018
I need the glass light bulb cover that is underneath this microwave vent a hood. It lights up my cooking surface, and the glass cover is broken. It is not inside the microwave. I can’t find the part number. Only the glass is broken but i don’t know if i need just the glass or the frame it’s in too.
For model number Jvm7195df1cc
Hello Patty, thank you for your question. The glass is replaceable by itself if that is all you need. The part number is PS247275. Please enter the part number into the site for current price and availability. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha
January 21, 2019
I have a hot point over range microwave oven that needs a glass (crystal) light cover. The one I found on this site part number ps24725 looks like what I need, but the size is wrong. The size I need is 2 1/2" x 3 1/2". Can you help find what part i would need??
For model number RVM1435WH001
Hello Marsha, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS247368. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
April 11, 2019
Need to replace the cover for the light -ordered the wrong part once already is correct part number ps247275? Thanks.
For model number PVM1870SM1SS
Hello Patrick, thank you for inquiring. For your model the Glass Light Lens is part PS247275 and the frame for it, the Light Cover Frame is part PS651487.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Connie
November 30, 2018
Need to change burn out light bulb in microwave
For model number JVM1950SR1SS
Hello Connie, Thank you for your inquiry. Part# WB36X10213 would be the halogen light bulb for this model. Hope this helps!
Was this helpful?
Thank you for voting!
Gina
January 17, 2019
I need the glass lens and frame for the cook top light under the microwave
For model number Jvm1630wh003
Hello Gina, thank you for your question. The lens is Part Number: PS955655. Unfortunately, the bracket that holds the glass into place has been discontinued by the manufacturer and is no longer available.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
