247209-1-S-GE-WB36X10003        -Light Bulb - 40W 130V
247209-1-S-GE-WB36X10003        -Light Bulb - 40W 130V http://www.partselect.com/Schematics/GE/GE_Thumb/00123223i01.gif

Light Bulb - 40W 130V

PartSelect Number PS247209

Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $7.52
  • You Save

    $1.25
  • Your Price

    $6.27
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Light Socket - 250V 75W

Part Number 230544

Light bulb not included.

$12.16
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 36 reviews What's this?
 

5 of 5 people found this instruction helpful

Parts Used

  • Light Bulb - 40W 130V

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerBruce from Cleveland, OH

Under microwave (above stove) light

The replacement of the light no problem, the reason the light broke; problem. The original was glued in (for transport i think) and simply trying to unscrew it out (in a very tight slot) it broke; be careful or you’ll be buying a new $20 bulb (with shipping and handling).

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJerry from Pearland, TX

Replace microwave light and broken base socket

Lower base of the microwave, about 6 screws,
replaced broken light bulb socket,then re-installed.
Installed new light bulb.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJill from Arlington, TN

Light socket replacement

I was told by 2 different appliance technicians that the crumbled/melted light socket could not be replaced which meant replacing the entire microwave (expensive!). Other posters on your sight described the repair steps and I gave it a try. The hardest part was probably figuring out which switch in the fuse box belonged to it (now marked clearly). It was a simple matter of unscrewing the bottom panel of the microwave to access the socket, pulling the crumbled/melted unit off and shoving the new one on. I can't believe the repairmen didn't want any part of even giving it a try.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerChris from Destin, FL

Broken glass and bad bulb

Removed one screw, slid frame out and removed broken glass. replaced bulb. The hard part was slidding the frame back in place and starting the screw. We were very surprised at the fast delivery of the parts, thank you. The sad part, a few days later the glass broke again. We are trying to get to the people at GE to solve our problem. We feel like that will not happen, we just do not have the time to stay on hold on the phone waiting for someone to solve our problem. Will reorder glass.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Light Bulb - 40W 130V

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDan from Leesburg, FL

No light

.Thank You Dan

Help other customers find the most helpful instructions.

Were these instructions helpful?