Quick Question!

Have you ever purchased from PartSelect.com before?

247209-1-S-GE-WB36X10003        -Light Bulb - 40W 130V
247209-1-S-GE-WB36X10003        -Light Bulb - 40W 130V http://www.partselect.com/Schematics/GE/00123223i01.gif

Light Bulb - 40W 130V

PartSelect Number PS247209

Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$11.50

You Save

$1.92

Your Price

$9.58
Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Light Socket - 250V 75W

Part Number 230544

Light bulb not included.

Order within the next 9 hrs and your part ships today!
$13.82
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 36 reviews What's this?
 

2 of 2 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dan from Leesburg, FL

No light

.Thank You Dan

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jeanne from Kirkwood, MO

Light bulb burned out and assembly broke when trying to replace bulb

I used the internet and your directions to complete the repair. It was easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: William from Littleton, CO

Glass light lens was broken, had collected grease, was dark.

Simply removed screw, pulled down light holder, unfoled the metal tabs, took out the broken pieces and replaced the glass lens and light bulb.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: John from Tucson, AZ

Turn table motor was noisy and lights were blown

I was very surprised to find that the parts for repair were still available after more than 10 years use. I replaced the bulb light sockets because they had become brittle after 10 years of use. I replaced the wiring harness because it had become discolored at the light socket connection end. The harness still worked but I feel safer having a new one. I also found the GE parts site very easy to navigate and order parts from. Replacement parts were installed by using only a philips head screwdriver and removing/reinstalling 14 screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Richard from Jackson Center, OH

Burnt out bulb and broken light socket

removed the bottom plate from microwave and replaced parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Warren from Council Bluffs, IA

The bulbs burned out, the glass lens cracked and the light socket broke when trying to remove the bulb

Replaced the sockets, lens and bulbs. The first time the new bulb was touching the lens and the heat broke the lens and burnt out the bulb. The second time I adjusted the socket so that the bulb does not touch the lens.

Impressed by how quickly the parts arrived after the order was submitted. Two days.

Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Terry from Justice, IL

Bulb burned out -cracked holder lamp

pluged wires back on ,placed lamp holder and bulb back and replaced screws

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Steven from Marina Del Rey, CA

Light bulb wouldn't light.

Removed difuser (one screw), removed old bulb, screwed in new bulb, replaced difuser.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Leon F. from Brookline, MA

Right hand surface lamp burned out. It apparently fald up and broke the glass cover. I wne on line when I found out the only local deaaler was some miles away and more expensive.

Simple. The parts came instantly. The glass was too big so I had it cut to size. I unscrewed the fixture with a screw driver replaced the bulb and slipped the glass cover into the frame and screwed the whole assembly in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Lois Jane from Fernley, NV

Light bulb burned out

took out several screws dropped down the panel under the microwave and unscrewed the bulb and put the new one in. It was a simple job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Judy Ann from Fort Pierce, FL

Bulb was burnt out

Just unscrewed the screw holding the lens, unscrewed the bulb and put the new bulb in. Simple

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Joseph from Henderson, NV

Glass cooking tray would not turn

put towel down not to lose the seven screws to remove drive motor. two screws to remove drive motor.replace motor and screws ,works now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Douglas from Angola, IN

Handle broke off, bulb burned out the broke trying to get it out.

Once on your web site it gave me a skematic of my microwave which showed me how the parts connected. I saw how easy it was and I saw what type of bulb it was I ordered the parts and it took less than 15 minutes to repair. Thank you so much for your site, It is now on my favorites list. Doug

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: WILLIAM from BONITA SPRINGS, FL

Burned out (and broken) light bulb

With many thanks to those who posted their experience and advice replacing the bulb, I was able to remove 5 of the 6 screws holding the underside panel and remove the socket which contained the broken off base of the bulb and extract it with needle-nose pliers. I had broken off the glass portion of the bulb trying to unscrew it due to the awkward contortion of my wrist-hand-fingers trying to grip the bulb inside the tight recess the bulb is mounted in. After concluding that I needed more information, I did a web search for 'Hotpoint RVM1435' and found helpful advice at partselect.com telling me to drop the bottom panel. Good call! Thanks everyone!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W 130V
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Samar from Fairfax, VA

Bulb under the microwave was burned out

changed the bulb

Help other customers find the most helpful instructions.

Were these instructions helpful?