247209-1-S-GE-WB36X10003        -Light Bulb - 40W 130V
247209-1-S-GE-WB36X10003        -Light Bulb - 40W 130V http://www.partselect.com/Schematics/GE/GE_Thumb/00123223i01.gif

Light Bulb - 40W 130V

PartSelect Number PS247209

Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $7.52
  • You Save

    $1.25
  • Your Price

    $6.27
In Stock
Order within the next 4 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Light Socket - 250V 75W

Part Number 230544

Light bulb not included.

Order within the next 4 hrs and your part ships today!
$12.16
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 36 reviews What's this?
1-5 of 36
 

135 of 151 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGene from Urbana, IL

Light bulb out, tried to remove, lamp socket broke

Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it out. Simply replaced socket, fastened bottom cover of microwave, installed new bulb and closed lens cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

148 of 301 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlyssa from Nottingham, MD

Threads stripped in the handle and the light bulbs burnt out

HANDLE:
1. Removed the 2 screws that used to hold the old handle.
2. Reattached the 2 screws to the new handle.

LIGHT BULBS:
1. Removed the screws that hold the light cover in place.
2. Replaced the bulbs.
3. Screwed the cover back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

64 of 68 people found this instruction helpful

Parts Used

  • Light Bulb - 40W 130V

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customerwilliam from san antonio, TX

Bulb had broken off in base that was still screwed into socket

At first I tried to use pliers to unscrew the base,very uncomfortable working position,upside down and backwards(the microwave is installed over the range top)very limited space for your body and arms to manuver and you really cant see the base,all of this took place after the breaker was turned off ofcourse,finally figured out that you can drop the entire bottom housing of the microwave by unscrewing 6 screws and the light sockets are easily accessable once you lower it,take out 1 retaining screw ,remove the entire socket and unscrewed the broken base and replaced the bulbs,I said bulbs,there is no sense in having to replace another bulb in who knows how long since only one had burned out but they were both the same age

Help other customers find the most helpful instructions.

Were these instructions helpful?

30 of 35 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerFrank from Reno, NV

Bulb burnt out and stuck to socket holder

1. Take off bottom panel
2. discon wire from microwave
3. set panel on table
4. unscrew panel cover under metal cover bracket
5. need to do that because screw from cover panel won't let you put in light bulb in round hole in metal cover panel
6. take new socket holder and insert bulb
and screw back on to metal cover bracket after remove bad socket holder and bulb by unscrewing
7. recon wire
8. test before putting back bottom panel
9. screw bottom panel back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 22 people found this instruction helpful

Parts Used

  • Light Bulb - 40W 130V

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLUCY from BALLWIN, MO

Changing the bulb that illuminates the cooktop

Loosen screw holding glass cover plate in place over bulb. Glass cover plate will swing down. Unscrew bad bulb, replace with good bulb, reset glass cover and tighten screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 36