Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS244906
This part works with the following brands: GE, Hotpoint & Kenmore.
Really self explanatory. Removed the old drip pans and put in the new. No tools required. However, I would like to say I received the parts the day after I ordered them. EXTREMELY FAST SHIPPING!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed the top back cover. Then removed screw for clock circuit board. swapped wires from old circuit board to new circuit board. reinstalled screws. Then replaced top back cover.
I removed the four burners and the two metal tops, easy as one, two, three!!
Replaced the old with the new parts...stove like new...very pleased with the improved function and appearance of stove.
There was nothing to repair, only remove the grates, drain and pot stands and replace with New. I need to know how should I prevent rusting?
No job here. . . . Just sat new parts on to replace old ugly parts.
These new pans fit perfectly.
changed double burmer pans
take off top grates,place new one's in time 20 sec.
replaced the parts
took off old ones and put on new ones
I am retired Industrial Arts teacher with two masters degrees in education. I have 35 years of experience teaching children ages 12 - 18 to safely use woodworking tools and build furniture. I also have 40 years of experience in the remodeling and construction trade. This fix was fairly easy since I was able to draw on my vast experience that included repairing and rebuilding numerous machines and tools. The Process: remove old ones replace with new ones.I am very satisfied with my experience with PartSelect.
First removed screws that held the bottom cover inside the oven. The igniter was underneath. Than I had to figure out how it was mounted to the stove. You couldn't remove the igniter from the gas burner tube until you pulled the lower draw completely out from the stove. Then with a small socket tool I reached all the to the back wall and removed the mounting screws. Then I disconnected the 2 power wires which enabled me to take the burner tube out through the oven. then you will be able to unscrew the igniter from the tube. Reverse the procedure to mount it back. Except for one small step I didn't expect. You had to cut the connectors from the old igniter and splice together the wires on the new igniter. Be sure to leave yourself enough wire to reach under the stove 6to 8 inches is good.
just changed the pans---replaced the support in the refrigerator with no problem, then replaced the cover. I put your web page in my favorites. Could not be happier with merchandise and how quickly I received my order
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.