| |
6 of 8 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerShannon from Blacklick OH
Needed to replace the drip pans.
Really self explanatory. Removed the old drip pans and put in the new. No tools required. However, I would like to say I received the parts the day after I ordered them. EXTREMELY FAST SHIPPING!!
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLinda from Brooklyn NY
I actually was supposed to order all the sides for the stove but somehow in the haste to have the order out only orderd the rt side. So I was left with only one burner to cook (ha!) I have subsiquently ordered the others.
There was nothing to repair, only remove the grates, drain and pot stands and replace with New. I need to know how should I prevent rusting?
|
9 of 24 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerHerbert from Monroe Township NJ
The grates and burner caps became discolored over time.
The black replacement parts give the stove a whole new and fresh look; and go well with other counter top appliances that are black too. The original color was Taupe Those parts became discolored from repeated cleaning. The constant heat of cooking also discolored the parts. The new black replacement parts are perfect and give a whole new look to the stove.
No tools were needed.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMelissa from Mastic Beach NY
Well used burners..
Replaced the old with the new parts...stove like new...very pleased with the improved function and appearance of stove.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJimmy from Bonifay FL
Only a "cosmetic" replacement.
No job here....just sat new parts on to replace old ugly parts.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from Auburndale MA
Range does not include drip pans as standard equipment.
These new pans fit perfectly.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAntonio from West New York NJ
I placed a plastic container on the burner and melted it!!!
I removed the four burners and the two metal tops, easy as one, two, three!!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDanuta from Oxnard CA
Cosmetic look of the stove top
changed double burmer pans
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerBrian from Taylorsville IN
Clock wouldn't keep time
Removed the top back cover. Then removed screw for clock circuit board. swapped wires from old circuit board to new circuit board. reinstalled screws. Then replaced top back cover.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerroland from oak creek WI
Replace burner pans
take off top grates,place new one's in time 20 sec.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerShelly from Phoenix AZ
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerApril from New York NY
Replace drip pans on stove top
took off old ones and put on new ones
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPhillip from Pittsfield MN
Replace old discolored pans
I am retired Industrial Arts teacher with two masters degrees in education. I have 35 years of experience teaching children ages 12 - 18 to safely use woodworking tools and build furniture. I also have 40 years of experience in the remodeling and construction trade. This fix was fairly easy since I was able to draw on my vast experience that included repairing and rebuilding numerous machines and tools.
The Process: remove old ones replace with new ones.
I am very satisfied with my experience with PartSelect.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsSocket set
CustomerANGELO from BALDWIN NY
Oven igniter broke oven did't turn on
First removed screws that held the bottom cover inside the oven. The igniter was underneath. Than I had to figure out how it was mounted to the stove. You couldn't remove the igniter from the gas burner tube until you pulled the lower draw completely out from the stove. Then with a small socket tool I reached all the to the back wall and removed the mounting screws. Then I disconnected the 2 power wires which enabled me to take the burner tube out through the oven. then you will be able to unscrew the igniter from the tube. Reverse the procedure to mount it back. Except for one small step I didn't expect. You had to cut the connectors from the old igniter and splice together the wires on the new igniter. Be sure to leave yourself enough wire to reach under the stove 6to 8 inches is good.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPHYLLIS from HOMER GLEN IL
Replace burner pans
just changed the pans---replaced the support in the refrigerator with no problem, then replaced the cover. I put your web page in my favorites. Could not be happier with merchandise and how quickly I received my order
|