244801-1-S-GE-WB32X5076         -Drip Bowl - 8"
244801-1-S-GE-WB32X5076         -Drip Bowl - 8" 244801-2-S-GE-WB32X5076         -Drip Bowl - 8" http://www.partselect.com/Schematics/GE/GE_Thumb/00007611i01.gif

Drip Bowl - 8"

PartSelect Number PS244801

This 8 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $7.27
  • You Save

    $1.21
  • Your Price

    $6.06
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drip Bowl - 6"

Part Number 244800

This 6 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

$5.61
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 18 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGeorge from Gahanna, OH

Baking element shorted out and burnt

I loosened two screws that held the baking element to the stove and pulled out. Then, with a screwdriver , I took the old wires off and replaced them onto the new Baking Element and reassembled.

It was a very easy task and while I was at it,I replaced the Drip Bowl pans on the top of the stove with Chrome ones.

I ordered the parts on a Tuesday and, to my surprise, I received them on Thursday, and the cost was about half of what it would have cost me elsewhere (to include GE Parts Warehouse)

I highly recommend partselect to all of you that need inexpensive repairs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerBet from Bothell, WA

The burner trays just needed replaced for an 85 year old senior citizen

Removed burner trays, pulled out heater unit, cleaned up inside of area around all four burners, slipped the burner trays back in and pushed the heater unit back into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerBobby from Trinity, TX

Old wore out parts

just put in the new part

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerSandy from Olney, MD

The original drip pans had rusted and needed replacement.

We tried to find the replacement pans at the local hardware store and were disappointed in that although they were cheaper, they were not deep enough to handle the heating elements. We were delighted to find that the parts from PartSelect.Com were genuine GE parts... installed in minutes and were delivered VERY quickly!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerJames from Londonderry, NH

No oven heat.

I repair tools for a living. I have thirty years experience fixing messed up equipment. When I initially looked a the problem, I thought maybe I had a loose lug underneath the top stove panel because I fixed a problem with the stove about five years ago with a lug falling off the clean switch located in the back. When I saw that there was no issue with this I inspected the oven element and could see that this was what was wrong all bubbled up etc. So I went to the website, long story short used the website application to find my parts and come to find out the wrong parts arrived. I called customer service and the lady fixed up everything in a matter of minutes. I should have called them in the first place. Anyway, all and all I have a new stove now for the most part. I cleaned it all up and installed the new parts that customer service sent, and its all good.

Help other customers find the most helpful instructions.

Were these instructions helpful?