BBB A-Plus
244760-1-M-GE-WB32X5036-Drip-Pan-8.jpg
244760-1-S-GE-WB32X5036-Drip-Pan-8.jpg 244760-2-S-GE-WB32X5036-Drip-Pan-8.jpg

Drip Pan - 8"

PartSelect Number PS244760

This part works with the following brands: GE, Hotpoint & Kenmore.

In Stock

  • Compare At

    $7.01

  • You Save

    $1.17

  • Your Price

    $5.84
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-7 of 7

 

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJudy from Bend OR

Pans old and rusty and needed replacement

I had called GE for the part numbers from the 1970's GE range. Then entered the part number on this web site. The cost from GE for four reflector pans/rings would have been $130. The price I paid here was $60. Both prices included the shipping. I received the order in a few days from Fed Ex. Wrapped in original GE plastic.

Thank you so much.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSharon from Newman Grove NE

The support brackets on one of the burner coils had broken. Also needed new burner pans

I removed the broken coil, took out the old burner pan, put in the new burner pan, and plugged in the new coil. Worked like a dream! Replacing the other burner pans went just as smoothly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJim from Plantsville CT

Esisting trim ring and drip pan severly corroded and stained.

Order special parts from PartSelect. Electric Burner was rare 3 level 4,6 8 inch selectable. Raise burner unit on hinge. Place drip pan, then trim ring under burner. Lower burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Drip Pan - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWendy from Jefferson OH

Replace drip pan

Could not find the right pan locally. This was the right one! Fast shipping also.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench set

Customerpaul from Madison ME

Drip pans did not match burners had to reorder

burners went on well, dic power , replaced with new purners, drip pans did not fit, .
My suggestion is that when showing the burner types the drip pan for that model should be shown also

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDenise from Bird in Hand PA

Old worn out drip pans

All I had to do was remove old drip pans and insert the new ones. What a huge difference it made. It made my stove look so much newer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWinnie from Hackettstown NJ

I replaced these parts to brighten up my stove before selling my home.

I lifted the coils, removed the old bibs and replaced them with the new bibs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-7 of 7