244696-1-M-GE-WB32X106-Drip-Bowl-8.jpg
244696-1-S-GE-WB32X106-Drip-Bowl-8.jpg 244696-2-S-GE-WB32X106-Drip-Bowl-8.jpg 244696-3-S-GE-WB32X106-Drip-Bowl-8.jpg

Drip Bowl - 8"

PartSelect Number PS244696

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $10.78
  • You Save

    $1.80
  • Your Price

    $8.98
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drip Bowl - 6"

Part Number 244697

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.

$7.48
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 7 reviews What's this?
1-7 of 7
 

9 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJennifer from Saginaw MI

Have tried 3 different store-bought drip pan sets over the past year. None of them laid flat.

Simple installation of new pans and all are level! Thank heaven! Thank you, PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerD. Cake from Spencerville OH

Old burners gone bad

tries brazing ends back onto posts...it did work but still not as good as I wanted. Bit the bullet for 100.00 and bought 2 new burners and drip pans. Only regret was not buying the two smaller burners with pans. Smaller ones still work but the new ones work like brand new and an added benefit is they make the stove look brand new!! Very pleased with decision to buy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAlfred from Forest VA

Burners would not lay flat

Removed the burner elements, removed and disposed of old drip pans, cleaned the area, relaced with new drip pans and replaced the burner elements. Verified all burners were level - good as the day it was new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 14 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerGregory from Princeton Junction NJ

Control switch did not function and one burner worked only occasionally

First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Ledyard CT

Finish coming off of bowls

Removed burner from each one. removed drip bowl. Inserted new bowl. Replaced burner. Excellent help from order people so I got the correct bowl was irreplacable.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDonna from Brownfield TX

Really, really grungy drip bowls

Threw away old drip bowls, cleaned the top of the range, put on new bowls! So easy, a cave man could do it! All kidding aside, took knobs off and soaked them in hot soapy water for a while, cleaned part of stove behind knobs, cleaned under the burners, put it all back together, and while it doesn't look a new stove because it's at least 20 yrs old, looks 100% better. I think I can live with it for a while until I get brave enough to remodel my kitchen. Soooooo scary.....

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJulie from Angleton TX

I got the old stove (27yrs) from a family member and right off had trouble finding parts. Once I had the book it came with it got a little easier. I got one part from sears. After that I went on line to find the other parts I wanted. I`m very happy with this site and next time I will go here first.

I pulled off the electtic burners ( the coiled part that heats) and replaced the the drip bowls . I cleaned the knobs so well the numbers came off 2 so I replaced them as well

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7