5 of 7 people found this instruction helpful
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
CustomerBill from Corona, CA
Worn / chipped bowl
Removed two screws, pulled out the igniter wire, removed a spring type wire holding the igniter to the bowl. Replace with new bowl, reconnected wire and placed new washer around bowl, placed back on stove top and screwed in place. Less than ten minutes to replace and only used a phillips screw driver.
1 of 5 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsPliers, Screw drivers
Customerross from conway, SC
Rebuilt stove top back to new condition
took cook top out for new counters and stipped cooktop down to bassic parts. cleaned everything and reassembled with new parts and paints.