Part Location Diagram of WB31X5013 GE Trim Ring - 6 Inch
See part 121 in the diagram
Replacing your General Electric Range Trim Ring - 6 Inch
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Trim Ring - 6 Inch WB31X5013

 Fits your RB632G!2AJ1!
★★★★★
★★★★★
4 Reviews

Rated by 36 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 8.44
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your RB632G!2AJ1!
PartSelect Number PS244475
Manufacturer Part Number WB31X5013
Manufactured by GE
Product Description

Trim Ring - 6 Inch Specifications

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Range Trim Ring - 6 Inch

Replacing your General Electric Range Trim Ring - 6 Inch
Troubleshooting
This part works with the following products:
Range, Microwave Oven Combo, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB31X5013 replaces these:
AP2028085, 5, 340525, WB31X0056, WB31X5008, WB31X5013A, WB31X5013DS, WB31X5013R, WB31X5015, WB31X56
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 36 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Till burner was wrong modes. Needed four input. Need refund on tilt burner or replace with correct part.
Oven unit went well and is working. Tilt burner unit was wrong and did not fit. Needs to be replaced by 8 inch tilt burner with four input.
Other Parts Used:
Bake Element Trim Ring - 6 Inch
  • Carol M from N PROVIDENCE, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the items ordered replaced the worn out ones.
the replacement items fit really good. It was a matter of remove and replace,
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Carl from Morristown, N.J., NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Elment Burned Out. Drip Bowls andTrim Rings Severly Tarnished and Very Old. Timer Knobs Broken.
Cleaned oven. turned off power at breaker panel. Removed mounting screws and pulled out oven element 4 inches to expose electrical terminals. Removed terminal screws and removed burned out element being careful not to let wires go back into insulation. Reversed procedure to install new oven element. Slid out old trim rings and drip bowls after slightly tilting surface elements. Cleaned top of range and installed new rings and bowls. Removed broken timer knobs. New knobs would not push on to the metal shafts until the metal retainers remaining in the slots were pushed out using a small screwdriver.
Other Parts Used:
Bake Element Timer Knobs - Kit of 3 Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Joseph from Clarkston, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing rusted drip pans on a 30 year old stove.
Just lifted the electric components Remove drip plans and trim rings and replaced with new drip pans and trim. Your company was incredible in there delivery of the parts..One day. You made my husbands very happy.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Dorothy-Anne from SHREWSBURY, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems
lift eye slide in bowl and trim ring, put the eye back down,
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Darlene from NORTH AUGUSTA, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowls WAY out of style
So this ancient stove we inherited when we bought our house had the drip bowls wrapped in tin foil. We've searched EVERY (not joking) store in our area for drip bowls that would fit it, but apparently Hotpoint wanted to make sure you could never do this - well, at least not easily. No one, not one store carries drip bowls to fit it. I finally searched online and partselect.com came up first on the list. I was amazed they had the right part! Better yet, ordering was beyond easy, and they came super quick. Popped in the parts in less than 2 minutes, and we're good to go - makes this old stove look new! (well, if this was the 80's, lol) When I clicked on the part it said which stoves it would fit, which was also very helpful. Thank goodness for Part Select! Otherwise we would've had to rewrap those disgusting old bowls... I'd recommend this site in a heartbeat!
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Joanna from Fargo, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original 8" coil burner defective
Took coil mounting assembly off first, then removed or took apart one piece at a time until heater coil was removed. Then installed (with furnished screws)the new coil, following entire process in reverse. 10-15 minutes time.
Other Parts Used:
Trim Ring - 8 Inch Trim Ring - 6 Inch 8 Inch Surface Burner
  • Robert from New Kensington, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old drip bowls and trim rings badly stained and dirty
It was so easy to find the correct items on your web site and they arrived in a very timely manner. Perfict fit. Now I know how to get parts when I need them.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Ruth from Wells, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace Drip Bowl
I just replaced them.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • DIANA from TINTON FALLS, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced rusted out Burner
I have tilt up burners on my Range, and decided to replace one that have finally rusted out the part that holds it in place. Repair was easy- installed according to the enclosed instructions. Parts arrived in good condition and very timely. A+
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch Tilt Lock Hinge Mounted Surface Element - 6"
  • alan from Tallahassee, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244475
Manufacturer Part Number: WB31X5013
Brand
Model Number
Description
Hotpoint
107RC445F
Range - Hotpoint Range/Stove/Oven Model 107RC445F Parts
Hotpoint
107RC690H
Range - Hotpoint Range/Stove/Oven Model 107RC690H Parts
Hotpoint
107RH971E
Range - Hotpoint Range/Stove/Oven Model 107RH971E Parts
Hotpoint
107RH971F
Range - Hotpoint Range/Stove/Oven Model 107RH971F Parts
Hotpoint
107RHV755J
Range - Hotpoint Range/Stove/Oven Model 107RHV755J Parts
General Electric
107RHV786J
Range
General Electric
108RB545-G
Range - GE Range/Stove/Oven Model 108RB545-G (108RB545G, 108RB545 G) Parts
Kenmore
20131
Range - Kenmore Range/Stove/Oven Model 20131 (1988) (20131(1988)) Parts
Kenmore
20221
Range - Kenmore Range/Stove/Oven Model 20221 (1988) (20221(1988)) Parts
Kenmore
20231
Range - Kenmore Range/Stove/Oven Model 20231(1988) Parts
Kenmore
20232
Range - Kenmore Range/Stove/Oven Model 20232(1988) Parts
Hotpoint
207RC669
Range - Hotpoint Range/Stove/Oven Model 207RC669 Parts
Hotpoint
207RCX549
Range - Hotpoint Range/Stove/Oven Model 207RCX549 Parts
Hotpoint
207RF755
Range - Hotpoint Range/Stove/Oven Model 207RF755 Parts
Hotpoint
207RH971F
Range - Hotpoint Range/Stove/Oven Model 207RH971F Parts
Hotpoint
207RHV786J
Range - Hotpoint Range/Stove/Oven Model 207RHV786J Parts
Hotpoint
207RHW872F
Range - Hotpoint Range/Stove/Oven Model 207RHW872F Parts
Kenmore
22104
Range - Kenmore Range/Stove/Oven Model 22104 (1988) (22104(1988)) Parts
Hotpoint
407RF45
Range - Hotpoint Range/Stove/Oven Model 407RF45 Parts
Hotpoint
407RF50
Range - Hotpoint Range/Stove/Oven Model 407RF50 Parts
Kenmore
99121-8
Range - Kenmore Range/Stove/Oven Model 99121-8(1988) (991218(1988), 99121 8(1988)) Parts
Kenmore
99138
Range - Kenmore Range/Stove/Oven Model 99138 (1988) (99138(1988)) Parts
Kenmore
99141
Range - Kenmore Range/Stove/Oven Model 99141 (1988) (99141(1988)) Parts
Kenmore
99148
Range - Kenmore Range/Stove/Oven Model 99148 (1988) (99148(1988)) Parts
Kenmore
99151
Range - Kenmore Range/Stove/Oven Model 99151 (1988) (99151(1988)) Parts
Kenmore
99158
Range - Kenmore Range/Stove/Oven Model 99158 (1988) (99158(1988)) Parts
Kenmore
99211
Range - Kenmore Range/Stove/Oven Model 99211 (1988) (99211(1988)) Parts
Kenmore
99221
Range - Kenmore Range/Stove/Oven Model 99221 (1988) (99221(1988)) Parts
Kenmore
99228
Range - Kenmore Range/Stove/Oven Model 99228 (1988) (99228(1988)) Parts
Kenmore
99241
Range - Kenmore Range/Stove/Oven Model 99241 (1988) (99241(1988)) Parts
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service