Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS244466
This six inch chrome drip bowl is intended for use with looped terminal style surface mount burner element units.
This part works with the following brands: GE, Hotpoint & Kenmore.
On Friday, the day after Thanksgiving, I placed an order for two replacement burners, four new pans, and two receptacle ASM's for my 30+ year old GE stove. I didn't know the exact model number, but because of your very informative website, I was able to look at the parts and find what I needed. Much to my amazement, the parts arrived the next day (24 hours after ordering!). I didn't pay for overnight or weekend delivery. You quickly fulfilled the order and shipped it the same day. It really was a great surprise to see the parts so quickly. To top it off, the installation was so simple that my 3 and 5 year olds helped out (after disconnecting the power first!) the installation was so straight forward, that my 5 year old unscrewed the nut that held the receptacle in place while the 3 year old unwrapped the new pans. All I needed was a Phillips head screw driver and a open ended wrench to complete the job. I replaced all the parts and had a stove that looked brand new (and worked) within 10 minutes. After 5 years of fighting a stove the intermittently worked, worrying about where to get parts, and wondering if I needed to purchase a new stove, it is all over. My wife is happy, I am happy, and my kids are happy that they had a fun Saturday project to help dad with. If I only knew about PartSelect 5 years ago, we would have been cooking worry free, knowing the stove is actually heating up.The procedure was simple! Here is what I did:1.) disconnected the power by lifting up the lever under the stove that held the power cable.2.) Removed the burners by simply pulling them out of the socket, and removed the drip pans.3.) used a wrench set to remove the screw holding the ceramic terminal block in place4.) removed the wires from the back of the terminal block with a Phillips head screw driver. On one of the burners, the terminal block assembly was so damaged, I used the pliers to break the ceramic and then held onto the receiving terminal to loosen the screw.5.) connected the new terminal block. I made sure by simply screwing on the wires. I made sure I clipped in the new plastic covering that protected the screws.6.) re-attached the terminal assembly block to the stove top. BE CAREFUL so as to not over-tighten, you can strip the screw7.) installed the new drip pans.8.) re-connected the power by simply plugging in the main power and re-camping the quick-disconnect.9.) Checked the stove to make sure everything worked.10.) Cooked dinner!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Unplugged the elements and removed the corroded drip pans and replaced them with the the new ones, which fit perfectly.
Removed the old drip pans and put the new ones in.
1. Went on line to your website.2. Ordered the parts3. Rec'd your package.4. Installed ("plugged in") the new parts.5. Voila !
real easyPARTS WERE NEVER SHIPPED FASTER 2 DAYS AND I HAD PARTSAT MY DOOR VERY HAPPY WITH ORDER NEIL
All I had to do was remove old drip pans and insert the new ones. What a huge difference it made. It made my stove look so much newer.
Replaced old drip bowls with the new ones. Very simple, no tools required.
I lifted the coils, removed the old bibs and replaced them with the new bibs.
Pulled the elements out and replaced the parts that were missing . Then replaced the elements.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.