Quick Question!

Have you ever purchased from PartSelect.com before?

244394-1-S-GE-WB31T10010        -Drip Bowl - 6"
244394-1-S-GE-WB31T10010        -Drip Bowl - 6" 244394-2-S-GE-WB31T10010        -Drip Bowl - 6" http://www.partselect.com/Schematics/GE/00115115i01.gif

Drip Bowl - 6"

PartSelect Number PS244394

The dishwasher roller assembly attaches to the dishrack located in the upper level of the dishwasher. It allows the dishrack to slide and roll easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/ or dishes are not cleaning properly, then it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove retaining tab from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is off before starting this installation project.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$8.90

You Save

$1.48

Your Price

$7.42
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drip Bowl - 8"

Part Number 244395

This drip bowl is sold individually. It is chrome in color and measures 10 inches in diameter at the widest point, with a hole in the middle. This is used to catch drippings and food that falls when cooking on the oven element. These might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When placing the new bowl, make sure to line up the hole with the terminal block where the element plugs into.

$9.43
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 21 reviews What's this?
16-21 of 21
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Cindy from Moreno Valley, CA

I had to replace my drip pans as well as the heating elements on all four burners

Very simple to replace, pull off the old element and push in the new one. Not only was it super easy, part select was so easy to work with. I had placed the order wrong, and immediately called customer service. They cancelled my order and placed the new one, refunding my money within 2 business days for the wrong order. Courteous, friendly and prompt. I would highly recommend them! Oh, I forgot to mention that the parts actually fit perfectly, unlike drip pans bought elsewhere. Thank you, Sincerely, Cindy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Paul from PROVO, UT

Old drip bowls were badly tarnished . . . Shine could not be restored.

1) Make sure unit switches are turned off. 2) Lift Calrod unit up and pull it from electrical receptacle. 3) Withdraw Calrod unit from old bowl. 4) Insert Calrod unit through large hole in new bowl. 5) Push Calrod electrical connectors into receptacle under range top. 6) Seat Calrod unit on bowl rim and insert the assembled Calrod unit and bowl into the hole in the range top.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Carolyn from Garden City, ID

Needed new burner bowls

Removed the old burner bowls, replacing them with the new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Caren from Choctaw, OK

Rusted drip bowls

I was very excited to get them in the mail but waited to install after a clean up but when I finally opened the box I found I only ordered 1 6 inch drip bowl. lol Now that I know they fit when I reorder I am ordering a who new set for later use.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: charles from st marys, GA

Part replacement

pull out, push in

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Connie from Evans, GA

The coils did not heat up well and they did not fit in the drip bowls exactly

I removed the drip bowls and pulled out each coil from the plug on the range. Plugged in the new coils and replaced the drip bowls.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-21 of 21