Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS244394
The dishwasher roller assembly attaches to the dishrack located in the upper level of the dishwasher. It allows the dishrack to slide and roll easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/ or dishes are not cleaning properly, then it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove retaining tab from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is off before starting this installation project.
This part works with the following brands: GE, Hotpoint & Kenmore.
This drip bowl is sold individually. It is chrome in color and measures 10 inches in diameter at the widest point, with a hole in the middle. This is used to catch drippings and food that falls when cooking on the oven element. These might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When placing the new bowl, make sure to line up the hole with the terminal block where the element plugs into.
This was about the simplest fix I've ever done. Just pulled off the old surface elements & burner bowls, wiped down the range top, and put in the new parts. Perfect fit. No problems at all. $$ well spent. ParsSelect shipped quickly, and they arrived well packaged. A+ experience all around. Thanks PartSelect. JA, San Ramon, CA
Help other customers find the most helpful instructions.
Were these instructions helpful?
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3
Removed burner element and put in bowl
Removed all surface elements, threw away old burner bowls, put the 3 older surface elements back in place and inserted the new element. The burner bowls look great. Now I won't wait so long to replace.Thanks.
Watched a repairman do it the last time for $200.00. This time I unplugged the stove, unscrewed four screw nuts holding the upper rear cover, unplugged old wires, reconnected new ones, fed them thru to the front, attached them to the new block, screwed the block into place, replaced back cover, stuck the element into place, made my little brother plug it back in and turn it on first. It worked. Cost me $20.00 to do what the repairman did the last time. I also replaced the reflector pans. No-brainer.
very easy..pull out burner, slide new one in..like a plug.none of the "replacement" burner bowls i found atstore like home depot/ bed bath and beyond and such didn't fit.. so much for universal sizing..thank you parts select.a very satisfied customer
Pulled out burner and put new bowls in. Looks like a new stove!
Took 5 minutes to replace the 4 bowls. Ordered the bowls one day & they arrived the next day All went perfect.
PartsSelect is the BEST!! This is the second time I've had to use them on home appliances. Their web site was easy to use, shipping was fast, prices competitive and instructions very easy to follow. I would not hesitate to use them again. Very happy with service from the get-go.
Parts ordered from Part Select arrived 2 days! after being ordered even though we selected standard shipping. Old generic poorly fitting bowls were removed, replaced with correct GE chrome bowls from Part Select, changed out 8" surface burner and it feels like we have a new stove! It looks great. All the surface burners fit perfectly into the new chrome bowls. I will definately be using PartSelect. for all my appliance repairs.
I carefully removed the burners, removed the bowls and replaced them with the new ones. Easy as pie!
I got tired of trying to find the right parts in the stores and decided to order them. Finally I have the drip pans that fit my range!
Fortunately there was no repair needed, just a replacement of old parts, but I was very pleased with the speed of delivery and the quality of the parts. I'm a happy customer.
Nothing to it. Took off the old ones and put on the new! Tada - new stove!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.