BBB A-Plus
244370-1-M-GE-WB31M15-Surface-Burner-Drip-Bowl-8.jpg
244370-1-S-GE-WB31M15-Surface-Burner-Drip-Bowl-8.jpg 244370-2-S-GE-WB31M15-Surface-Burner-Drip-Bowl-8.jpg

Surface Burner Drip Bowl - 8"

PartSelect Number PS244370

This part works with the following brands: GE, Hotpoint & Kenmore.

In Stock

  • Compare At

    $5.88

  • You Save

    $.98

  • Your Price

    $4.90
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Burner Drip Bowl - 6"

Part Number 244371

This chrome drip bowl is sold individually.
$3.96
  In Stock

Porcelain Drip Bowl - 8"

Part Number 244373

This 8" drip bowl is intended for use with loop style surface mount burner element units.
$5.30
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-5 of 5

 

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMarlene from Rancho Murieta CA

We had been searching for burner bowls for our ge range (10+ years old) and could not find replacements for them. I found the burner bowls we needed on partselect.Com . I was able to easily place the order and the burner bowls were delivered to me the next day.

No repair necessary, but the service was excellent!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerRichard from McCall ID

When I pulled out the bake element, one of the two wires disconnected inside the stove.

I had to pull out the stove. This was difficult since the stove was stuck on a refinished floor. Then remove a back cover and hook up the wire. I then had to re-level the stove. It all turned out great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Richmond VA

Needed new burner bowls

No repairs, really-just replacement, but I have been looking for the burners for three and one half years, and PartSelect had exactly what I needed for this old stove!
Theyalso had the electric element that I bought in the next order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSharon from Newman Grove NE

The support brackets on one of the burner coils had broken. Also needed new burner pans

I removed the broken coil, took out the old burner pan, put in the new burner pan, and plugged in the new coil. Worked like a dream! Replacing the other burner pans went just as smoothly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Surface Burner Drip Bowl - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Buffalo NY

Replace a drip pan

OK, I put the drip pan under the burner. Without a single problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-5 of 5