244016-1-S-GE-WB30X255          -Surface Burner - 8" - 2100W
244016-1-S-GE-WB30X255          -Surface Burner - 8" - 2100W 244016-2-S-GE-WB30X255          -Surface Burner - 8" - 2100W http://www.partselect.com/Schematics/GE/00010096i02.gif

Surface Burner - 8" - 2100W

PartSelect Number PS244016

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $60.90
  • You Save

    $10.15
  • Your Price

    $50.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Burner - 6" - 1250W

Part Number 244017

$40.15
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

7 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: D. Cake from Spencerville, OH

Old burners gone bad

tries brazing ends back onto posts...it did work but still not as good as I wanted. Bit the bullet for 100.00 and bought 2 new burners and drip pans. Only regret was not buying the two smaller burners with pans. Smaller ones still work but the new ones work like brand new and an added benefit is they make the stove look brand new!! Very pleased with decision to buy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2100W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lois from KNOXVILLE, TN

Two large burners wouldn't heat or would smoke even after cleaning

i really wanted a new stove, but budget wouldn't permit; so just had to insert the new ones and they work great with level cooking.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Irma from Greensboro, NC

Heat in elements was inconsistent

Removed block (1 screw) Cut 2 connecting wires. Strip insulation. Attach new block with wire nut(per enclosed instructions) Heat shrink wrap with Lighter. attach block. 10 minutes: problem solved

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: J. R. from Ellettsville, IN

Burner broken

I removed the block, cut and spliced the wires to the new block and installed the burner. I used the new style block kit and saved about $30. It worked great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4