| |
5 of 14 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerGregory from Princeton Junction NJ
Control switch did not function and one burner worked only occasionally
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Rolled Terminal Surface Unit - 6" - 1250W
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMary from south bristol ME
Burner broke apart under a pot
Pulled out the burner. Just pulled and out it came. Looked you up online. Crawled around on the floor trying to find the model number. (This was the hardest part of the whole process.) Ordered the part; it came the very next day despite the fact that I didn't order special shipping. Unpacked the part, plugged it in. And it worked!!!!
FABULOUS service. Thank you so much.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJose from The Woodlands TX
Coils with tips damaged
it was very easy, a few seconds and new range for a cuople of years more!
|
0 of 2 people found this instruction helpful
Parts Used
-
- Rolled Terminal Surface Unit - 6" - 1250W
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAudret K, from San Diego CA
Metal "y",shape metal long arm attached to burner came loose.Holding the coil to burner
just plugged in the two prings into burner into outlet. Very simple and quick.
|