244014-1-S-GE-WB30X253          -Surface Burner - 8" - 2100W
244014-1-S-GE-WB30X253          -Surface Burner - 8" - 2100W 244014-2-S-GE-WB30X253          -Surface Burner - 8" - 2100W 244014-3-S-GE-WB30X253          -Surface Burner - 8" - 2100W

Surface Burner - 8" - 2100W

PartSelect Number PS244014

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $36.54
  • You Save

    $6.09
  • Your Price

    $30.45
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rolled Terminal Surface Unit - 6" - 1250W

Part Number 244015

$27.34
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 6 reviews What's this?
1-6 of 6
 

1 of 1 people found this instruction helpful

Parts Used

  • Surface Burner - 8" - 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerChristine from Danbury NC

Old unit was bent and didn't work properly

I unplugged the old unit and plugged in the new one! It works.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Surface Burner - 8" - 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerCharles from Carthage NY

Large burner would not heat

I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal with.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 14 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerGregory from Princeton Junction NJ

Control switch did not function and one burner worked only occasionally

First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTim from Coeur D Alene ID

No heat

Unplugged unit. Pulled 2 screws from bake element. Pulled terminals and screwed back in. On upper element you just pull the old one and push in the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJose from The Woodlands TX

Coils with tips damaged

it was very easy, a few seconds and new range for a cuople of years more!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

  • Surface Burner - 8" - 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerManuel from Quakertown PA

The heating element's contacts were burnout

QUITE SIMPLE, JUST PLUG-IN THE NEW ONE

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6