Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS244001
This part fits most ranges where a ceramic terminal block is used.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
This ceramic terminal block kit includes one ceramic block and terminal assembly with mounting bracket. Terminal blocks generally provide an easy solution for connecting individual wires.
This six inch chrome drip bowl is intended for use with looped terminal style surface mount burner element units.
On Friday, the day after Thanksgiving, I placed an order for two replacement burners, four new pans, and two receptacle ASM's for my 30+ year old GE stove. I didn't know the exact model number, but because of your very informative website, I was able to look at the parts and find what I needed. Much to my amazement, the parts arrived the next day (24 hours after ordering!). I didn't pay for overnight or weekend delivery. You quickly fulfilled the order and shipped it the same day. It really was a great surprise to see the parts so quickly. To top it off, the installation was so simple that my 3 and 5 year olds helped out (after disconnecting the power first!) the installation was so straight forward, that my 5 year old unscrewed the nut that held the receptacle in place while the 3 year old unwrapped the new pans. All I needed was a Phillips head screw driver and a open ended wrench to complete the job. I replaced all the parts and had a stove that looked brand new (and worked) within 10 minutes. After 5 years of fighting a stove the intermittently worked, worrying about where to get parts, and wondering if I needed to purchase a new stove, it is all over. My wife is happy, I am happy, and my kids are happy that they had a fun Saturday project to help dad with. If I only knew about PartSelect 5 years ago, we would have been cooking worry free, knowing the stove is actually heating up.The procedure was simple! Here is what I did:1.) disconnected the power by lifting up the lever under the stove that held the power cable.2.) Removed the burners by simply pulling them out of the socket, and removed the drip pans.3.) used a wrench set to remove the screw holding the ceramic terminal block in place4.) removed the wires from the back of the terminal block with a Phillips head screw driver. On one of the burners, the terminal block assembly was so damaged, I used the pliers to break the ceramic and then held onto the receiving terminal to loosen the screw.5.) connected the new terminal block. I made sure by simply screwing on the wires. I made sure I clipped in the new plastic covering that protected the screws.6.) re-attached the terminal assembly block to the stove top. BE CAREFUL so as to not over-tighten, you can strip the screw7.) installed the new drip pans.8.) re-connected the power by simply plugging in the main power and re-camping the quick-disconnect.9.) Checked the stove to make sure everything worked.10.) Cooked dinner!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed old heating elements and drip bowls and replaced. Doesn't get much easier than that. parts deleivered in 1 day (even though I chose the slow delivery option) and was fixed that day - Wife HAPPY - me happy!
First I pulled the heating elements from socketsRemoved 1/4 " screw from socket brackets. Removed two wires from socket , reversed procedure, tested , work fine ,wife happy, me happy. Parts were delivered in 3 days.
The Surface Element on our GE stove made in the mid 70's finally gave up and would not heat. I went to several of the big home improvement stove with not luck in finding the right heating element for our stove so I turned to a local appliance stove that carries GE products, they did sell me an element and asured me it was the correct one, but once again the element was the wrong one. Then with a simple google search for GE replacment parts I found partselect.com. With the detailed description and images with measuring grids I was able to quickly find the correct heating element for me stove. I am very pleased and the stove is back to 100%.Thanks partselect.com
The interesting part of this story was troubleshooting the problem. Was it the element or the control? Turns out the element was making poor contact, generating excess heat ,which corroded the element contact generating even more heat, and so on and so on until the termional block eventually broke. The repair itself was simple once I separated the element from the terminal block. After that I removed the terminal block, one screw, removed the connecting wires, two screws, reversed the procedure to install the the new terminal boplck and element. Before the whole process began I made sure to turn the breaker to OFF.
First I removed the one screw that hold the terminal block in place. I then pulled the terminal block out about 3 inches and unscrewed the two screws and disconnected the two wires. Then I got the new terminal block and re-attached the two wires with the two screws. Then I screwed the terminal blocked with the one screw and then I inserted the 8" Surface Element and I turned it on and it heated up very quickly. It works better than it has in many years.
1. Went on line to your website.2. Ordered the parts3. Rec'd your package.4. Installed ("plugged in") the new parts.5. Voila !
We just remove the old surface unit and insert the new one by hand. Thanks to PartSelect, we were able to buy really good quality part that works right away! It was a 26-year-OLD GE Stove/Microwave space maker, the parts were hard to find in stores. Thank you for selling this! All the best for your business!
Pulled out the old burner that was held in by a metal spring clamp. Pushed the new one in.Good as new.
Simply unplug old unit and plug in the new. Easy
Just pull out the current element and plug-in the new one. Part was received in 24 hours.
Replacement element also failed to heat. Possible that the problem is with the stove itself, not with the surface element.
Partselect had the right part, clearly indicated in the diagrams and menus. Shipped quickly. Easy to use web site.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.