244001-1-S-GE-WB30X219          -Surface Element - 8"
244001-1-S-GE-WB30X219          -Surface Element - 8" 244001-2-S-GE-WB30X219          -Surface Element - 8" 244001-3-S-GE-WB30X219          -Surface Element - 8"

Surface Element - 8"

PartSelect Number PS244001

This part fits most ranges where a ceramic terminal block is used.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $34.07
  • You Save

    $5.68
  • Your Price

    $28.39
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Element - 6" - 1325W

Part Number 243999

$23.07
In Stock

Terminal Block Assembly

Part Number 232617

This ceramic terminal block kit includes one ceramic block and terminal assembly with mounting bracket. Terminal blocks generally provide an easy solution for connecting individual wires.

$9.06
In Stock

Drip Bowl - 6"

Part Number 244466

This six inch chrome drip bowl is intended for use with looped terminal style surface mount burner element units.

$6.12
In Stock

Drip Bowl - 8"

Part Number 244470

Sold individually.

$7.32
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 13 reviews What's this?
1-13 of 13
 

8 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers, Wrench set

CustomerRobert from Chesterfield MO

Two burners kept cuttin out.

On Friday, the day after Thanksgiving, I placed an order for two replacement burners, four new pans, and two receptacle ASM's for my 30+ year old GE stove. I didn't know the exact model number, but because of your very informative website, I was able to look at the parts and find what I needed.

Much to my amazement, the parts arrived the next day (24 hours after ordering!). I didn't pay for overnight or weekend delivery. You quickly fulfilled the order and shipped it the same day. It really was a great surprise to see the parts so quickly.

To top it off, the installation was so simple that my 3 and 5 year olds helped out (after disconnecting the power first!) the installation was so straight forward, that my 5 year old unscrewed the nut that held the receptacle in place while the 3 year old unwrapped the new pans. All I needed was a Phillips head screw driver and a open ended wrench to complete the job. I replaced all the parts and had a stove that looked brand new (and worked) within 10 minutes.

After 5 years of fighting a stove the intermittently worked, worrying about where to get parts, and wondering if I needed to purchase a new stove, it is all over. My wife is happy, I am happy, and my kids are happy that they had a fun Saturday project to help dad with. If I only knew about PartSelect 5 years ago, we would have been cooking worry free, knowing the stove is actually heating up.

The procedure was simple! Here is what I did:
1.) disconnected the power by lifting up the lever under the stove that held the power cable.
2.) Removed the burners by simply pulling them out of the socket, and removed the drip pans.
3.) used a wrench set to remove the screw holding the ceramic terminal block in place
4.) removed the wires from the back of the terminal block with a Phillips head screw driver. On one of the burners, the terminal block assembly was so damaged, I used the pliers to break the ceramic and then held onto the receiving terminal to loosen the screw.
5.) connected the new terminal block. I made sure by simply screwing on the wires. I made sure I clipped in the new plastic covering that protected the screws.
6.) re-attached the terminal assembly block to the stove top. BE CAREFUL so as to not over-tighten, you can strip the screw
7.) installed the new drip pans.
8.) re-connected the power by simply plugging in the main power and re-camping the quick-disconnect.
9.) Checked the stove to make sure everything worked.
10.) Cooked dinner!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Dixon IL

2 main burners would not heat - connectors on elements were corroded

Removed old heating elements and drip bowls and replaced. Doesn't get much easier than that. parts deleivered in 1 day (even though I chose the slow delivery option) and was fixed that day - Wife HAPPY - me happy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJeffrey from St. Charles MO

2 elements not heating

First I pulled the heating elements from sockets
Removed 1/4 " screw from socket brackets.
Removed two wires from socket , reversed procedure, tested , work fine ,wife happy, me happy.
Parts were delivered in 3 days.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlfred from East Northport NY

Element would not heat to max temp.

The interesting part of this story was troubleshooting the problem. Was it the element or the control? Turns out the element was making poor contact, generating excess heat ,which corroded the element contact generating even more heat, and so on and so on until the termional block eventually broke. The repair itself was simple once I separated the element from the terminal block. After that I removed the terminal block, one screw, removed the connecting wires, two screws, reversed the procedure to install the the new terminal boplck and element. Before the whole process began I made sure to turn the breaker to OFF.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSean from Anaheim CA

Surface element contacts when they were insert into the terminal block became burned up they were not making any contact to heat up.

First I removed the one screw that hold the terminal block in place. I then pulled the terminal block out about 3 inches and unscrewed the two screws and disconnected the two wires. Then I got the new terminal block and re-attached the two wires with the two screws. Then I screwed the terminal blocked with the one screw and then I inserted the 8" Surface Element and I turned it on and it heated up very quickly. It works better than it has in many years.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAnthony from Bowden WV

Could not find a replacement part anywhere

The Surface Element on our GE stove made in the mid 70's finally gave up and would not heat. I went to several of the big home improvement stove with not luck in finding the right heating element for our stove so I turned to a local appliance stove that carries GE products, they did sell me an element and asured me it was the correct one, but once again the element was the wrong one. Then with a simple google search for GE replacment parts I found partselect.com. With the detailed description and images with measuring grids I was able to quickly find the correct heating element for me stove. I am very pleased and the stove is back to 100%.
Thanks partselect.com

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJ. from Durham NC

Element burned out

Partselect had the right part, clearly indicated in the diagrams and menus. Shipped quickly. Easy to use web site.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerYi from Miami FL

The old surface unit was not generating heat

We just remove the old surface unit and insert the new one by hand. Thanks to PartSelect, we were able to buy really good quality part that works right away! It was a 26-year-OLD GE Stove/Microwave space maker, the parts were hard to find in stores. Thank you for selling this! All the best for your business!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJay from Madison WI

Old burner was crappin' out after 20 years of service

Pulled out the old burner that was held in by a metal spring clamp. Pushed the new one in.

Good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCatherine from Corinna ME

Both 8 inch surface units burned out

Simply unplug old unit and plug in the new. Easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerFrank from Canyon Country CA

Element wouldn't heat

Just pull out the current element and plug-in the new one. Part was received in 24 hours.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCharles G from Columbia MD

Range element failed to heat

Replacement element also failed to heat.

Possible that the problem is with the stove itself, not with the surface element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCaptain Bernie from Stamford CT

Burners old, worn out

1. Went on line to your website.
2. Ordered the parts
3. Rec'd your package.
4. Installed ("plugged in") the new parts.
5. Voila !

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-13 of 13