243868-1-S-GE-WB30M2            -Surface Element - 8" - 2350W
243868-1-S-GE-WB30M2            -Surface Element - 8" - 2350W 243868-2-S-GE-WB30M2            -Surface Element - 8" - 2350W 243868-3-S-GE-WB30M2            -Surface Element - 8" - 2350W http://www.partselect.com/Schematics/GE/GE_Thumb/00006152i01.gif

Surface Element - 8" - 2350W

PartSelect Number PS243868

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $39.73
  • You Save

    $6.62
  • Your Price

    $33.11
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Element - 6" - 240V

Part Number 243867

This Y-frame six inch surface burner element has five turns and a metallic center medallion.

$41.21
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 42 reviews What's this?
 

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRadford from Herndon, VA

Element was loose, heated erratically

The cause of the problem was that I had installed a generic replacement recepticle earlier. Parts Select had the correct part. It came with handy wire nuts to help connect to range wires to the recepticle wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2350W

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerPaul from Southern Pines, NC

Surface element was corroded.

Removed existing surface element and replaced with new element.

P.S.

Part Select service was excellent.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRobin from Lansdowne, PA

Burners burnt out

Removed 4 screws holding the control panel removed the receptacle wires removed the screw holding the receptacle in place. Inserted the new receptacle screwed it in inserted the the wires to control knob. Screwed the control panel in place. Replaced 2 burners and 2 elements with in a half hour. Simple. Received the parts with in a few days. Will order from here for now on. Before we ordered looked for parts everywhere could not find them. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2350W

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerCarole from Cleveland, OH

Melted electric range element

Because of the superb pics and descriptions on the Part Select site, I was able (with NO range model number) to order the correct range element for beloved son's stove. He plugged it in in 3 seconds, works great !

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJoseph from Guilford, NY

Small elements were losing heating power and large elements did not work.

I unplugged each element from the terminal it was plugged into and then plugged the new element in. I also replace the drip pans and trim rings while I was at it.

Help other customers find the most helpful instructions.

Were these instructions helpful?