Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS243867
If you notice that your surface element will not heat properly, you may need to replace it. This surface element is 6 inches in diameter and 240V. It is a Y-frame surface burner element with five turns and a metallic center medallion. When completing this repair, if you notice any signs of corrosion or overheating on the terminal, you may want to consider replacing the terminal block as well as the surface element. Many of our customers have rated this repair as easy. To complete this repair, simply tilt the old element up and remove it, and then replace it with your new one.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
The surface element, also known as the coil surface element, transfers heat to the area on top of range. The element is 8 inches in diameter. If your surface element does not heat, over heats, or heats inconsistently, replacing this part can be the solution to your issue. To determine whether the element is defective, use a multimeter to test it. Before installing the new element, make sure the drip bowl is properly aligned with the notch of the pan. Insert the new element into the reciprocal at a 40 degree angle. Refer to the instructions provided by the manufacturer for more guidance.
Changed out the burner element and then updated all of the centers on the remaining elements. changed out the rings and the pans and now the stove looks new. Thanks for the fast shipping. Brett
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the broken coil, took out the old burner pan, put in the new burner pan, and plugged in the new coil. Worked like a dream! Replacing the other burner pans went just as smoothly.
I am the worst handy man, but I have to say, this was so easy. Web site was well designed to find the exact part I needed. The coils pull out of the blocks with moderate pressure. Stove top lifts up like a car hood and rests on little arms. The blocks unscrew from retaining holes with a few turns of a nut driver. Take the back of the stove off, a matter of 8 screws and two minutes. Poke the new wires through following the old wires, pull the spade terminals loose by hand or needle-nose pliers and replace with new. Polarity indeed does not matter. Incredibly fast. Took me a quarter hour. (We will not speak of the extra hour of cleaning areas no scrub brush had ever seen).
Shut off power! Removed oven racks, squeezed into the oven and removed screws securing the broiler element. Uplugged terminals from old element. Plugged terminals on new element and mounted it to the back of the oven. Surface elements are quick-disconnect replacement type. Just tilted up, pulled out and replaced with new one. One of them had welded into the receptical, requireing me to dismount the receptical and unscrew the wires. Best part identifier system I've ever seen -- wish car parts places would use this technique!
Easy repair. Remove Bake Element and replace. Only 4 screws. Remove vent hood and replace. Remove and replace rang top 6 inch burner.. Took a few days to replace the wrong parts that I ordered at first. Parts Select took the wrong parts back at full refund and I ordered other part the second time. Very Happy
Just put it right into the receptacle. I want to add...we had gone to our local appliance store and brought home a wrong-size unit. Got online and your website came up. It was easy to find the correct part, ordered it and it arrived 3 days later. I have already recommended your website to 2 of my friends. One very good experience!!!
ordered the parts and then replaced old with new.
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
Removed the old and slipped in the new.No problem and it works fine.
They fit perfect
disconnected electricity, used pinch pliers to remove broken ends from connection box and used an already existing element to make sure a new one would work at all. Ordered new one that arrived very quickly and replaced the broken one. After years of taking these in and out for cleaning by outside cleaning help they are bound to break off. I will do the gentle removal from now on.
ordered parts and disassembled old burners and installed new ones. All the parts were in the box when delivered.Helping my 80 yr old mother-in-law very happy.Got parts in for one of her 81st birthday present she was thrilled.
just plugged it into the socket
I simply pulled out the old element. Plugged inthe replacement, which arrived very quickly, andthat was it. I couldn't believe that was all therewas to it. I really loved being able to order thereplacement part online. Intend to order morereplacement parts just to have my stovetoplooking like new again.
A breeze! Part was perfect replacement, snapped in place without tools, and heated almost immediately.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.