The round style oven igniter is also known as an oven bake or broil igniter and is compatible with your range appliance. The function of the round style oven igniter is to pull electrical current through the oven safety valve to open it. If your igniter is glowing for more than ninety seconds but it has not ignited the gas flame, that means that the igniter is not powerful enough to open the valve. Be very careful when handling this igniter as it is very fragile. This igniter has a range of 2.5 to 3.0 amps. Note that this round igniter will not replace flat style igniters.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Little to no heat when baking | Gas igniter glows | but will not light
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Madeline G - February 6, 2024
Verified Purchase
Oven igniter
The part that I purchased was needed for an oven that is over 20 years old and not available locally. It arrived in a short amount of time and in perfect condition.
★★★★★
★★★★★
David C - January 14, 2024
Verified Purchase
Oven ignitor
The part arrived in good condition and was quickly installed. It warmed up and the gas opened and heated the oven. Unfortunately, when it was attempted again it failed and did not ignite again. The part was removed and a new oven was purchased.
★★★★★
★★★★★
Gavin D - March 22, 2023
Verified Purchase
Worked Great. Very easy
Oven works like new
★★★★★
★★★★★
Greg G - December 30, 2022
Verified Purchase
Easy repair, shipping was fast and I was kept informed
The part was perfect and was well protected for shipping purposes
I appreciated the step by step repair instructions provided by Part Select made the repair very easy.!
★★★★★
★★★★★
William D - August 28, 2022
Verified Purchase
Easy repair
Part arrived on time and works great!
★★★★★
★★★★★
Bill S - January 28, 2022
Verified Purchase
oven igniter
part arrived in less than 24hr. Installed quickly and works great.
★★★★★
★★★★★
Janet C - December 4, 2021
Verified Purchase
THANKSGIVING SAVIOR!!
I want to thank you guys for saving thanksgiving. My igniter went out one week before thanksgiving. And I was panicked. I went to the parts store and was told it would be well over $100 and the part still may not come in before thanksgiving. So I was of course really upset. And then my granddaughter went looking online and found this company. And was able to get express shipping!! Doing that didn’t even cost me $100!! My part was at my house within two days and thanksgiving was saved!!!! Thank you part select for being here and saving us money. Any part I need will now check this company first!!
★★★★★
★★★★★
Barbara H - June 17, 2021
Verified Purchase
Had it back working in less than 30 min.
All is well now with the oven.
★★★★★
★★★★★
William R - June 9, 2021
Verified Purchase
Service
The part was OEM the first one received was broken in shipment I phoned immediately and they sent a replacement that day ,it arrived timely and in good condition
★★★★★
★★★★★
Karen B - June 5, 2021
Verified Purchase
Saved the Day
The oven igniter reached was the correct part needed. It was received very quickly and, even though I didn't need them, clear installation instructions were included. Works great.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 164 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven igniter didn't work.
The bolts were below the base of the oven, and very difficult to remove and replace. The directions were not applicable to our unit. The good news was the igniter was correct, even though we had to adapt the bracket.
Jacklyn from HOWARD CITY, MI
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor burned out and would not allow oven to heat
This oven is from 1993 and a lot less complicated than today's models probably are. The first things to do are to remove the oven door and broiler pan. On this model, the oven door simply lifts off the hinges. Once these are gone, you want to remove the oven floor. To remove, locate the two screws at the back of the floor. After removing,
... Read more lift the floor up and towards the back to pull the floor tongue out of the groove in the front. This will expose the gas jet and ignitor assembly. At the front of the jet pipe is a screw that holds the pipe to the front center of the frame - it is underneath so you may have to bend over to see it, it can be felt easily as well. Remove this screw, this will allow the pipe to be moved a little later. In front of the assembly is a vertical metal plate with a screw at the right of the mounting the plate into the broiler floor. Remove the screw and slide the plate to the left to pull out another tongue/groove set-up. Now you should see the wires completely and the connection to the air-flow adjuster. There is a small screw in the front of this brass fitting, it does not need to be touched. Turn the burner pipe clockwise while lifting and this should pop the assembly up. The ignitor is mounted to the burner pipe by 2 screws that are found on the bottom of the mount. Remove the 2 screws, this will allow the ignitor to hang free. Be sure to pay attention to what wire attaches to what wire, I marked the left wire so that I knew which to reconnect to after the change over. Remove the caps on the wires if this unit has been removed before, if not then mark the wires on both the replacement unit and the original wires. My ignitor has been replaced before, so I used my wire cutter to clean-up the ends of the old connection before reconnecting the new replacement. At this point, you should be able to fire-up the oven, it might take a moment for the new one to warm up, so give about 30-40 seconds. If the oven fires up, it's then working to put everything into place in reverse order. I like to line up the parts and pieces as I remove so I can just put back in reverse.
Read less
Daniel from DEKALB, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out
Go to utube videos for this are there
John from GLENVIEW, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven igniter not functioning.
Unplugged the electrical.Removed the door, removed the oven racks and removed the bottom pan. Removed the wire nuts from the two wires. Removed the burner tube. Removed the Igniter. Installed in reverse order. It was very easy however it was the third igniter that I had to replace in this range so I was used to it.
Larry from Jenison, MI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter would not glow and light oven.
Straight forward as per instructions. Removed old igniter, replaced and tested new one and it worked. However, the gas oven would not turn of. Valve may be defective. Knob control is not stripped and turned to full stop. Troubleshooting continues. Part(s) and instructions worked perfectly.
Robert from FALL CITY, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 hexhead screws on back side of igniter with no room to get to them.
They turned out to be 1/4 inch hex head screws. Only after soaking with penetrating oil could we budge them. There must be a special tool to loosen them on the back side where there is no room to get a socket on them and since they are in the heated part of the oven they are almost welded in. We were successful, but could only get one
... Read morescrew back in. So never use your oven with the door left open as I did if you do not want to repeat what happened to me.
I'm still repairing. The igniter was replaced with new but it still doesn't glow. I'm waiting for a schematic that is being mailed to me from GE. In the meantime I have borrowed a test instrument to check that the system is hot when the BAKE button is pushed. The controls light up as expected but no glow. The BROIL igniter glows whe
... Read moren activated, lighting the broiler. The new Ignite was packaged very well so it isn't suspect. I LEFT YOU FOR A FEW HOURS. I tested the electrical with a meter and got zero voltage. I removed the wire nuts and using two alligator clips I connected the meter to the bare wires coming from the oven wall. I then hit BAKE again and BINGO! Replaced the defective wire nut and now the igniter is happy as a clam. --- Thanks for your interest and for expediting the material.
Read less
JAMES from GARDEN GROVE, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven wont turn on but broiler does
Replaced the oven igniter
Nick from south st. paul, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven worked but broiler wouldn't work
Moved stove out from wall and unplugged 110 cord. Removed broken igniter from broiler with nut driver. Removed protective cover from back of stove. Cut off plug from existing igniter wires on the back of the stove. Installed new igniter and fed wires trough to the back of stove and connected the wires with the supplied wire nuts. Reinstal
... Read moreled protective cover on the back of the stove. Plugged the 110 cord back in and returned stove back to the original location.
Read less
Rodney from Rio Vista, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven did not warm up / ignite
I was a bit hesitant to perform this repair but attempted it due to the other write-ups which were very helpful. The repair went very well and was quite easy. There was a suggestion to remove the gas defuser (the pipe thing that has the igniter attached), I believe loosening this defuser made the whole repair so much easer and quicker. Tr
... Read moreying to remove the two screws that hold the igniter without this approach would have been very difficult. I was hesitant to do this but removing the 3 screws that hold the defuser in place was not a problem at all.
Read less
GILBERT from MEDINA, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
47 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lee
January 7, 2018
Broiler works, top burners work. Bake does not at all. Any solutions? Thanks! (checked gas valve....it was closed. I opened it and still no bake). perhaps a new igniter or something else?
For model number jgbp2bwel4ww
Hi Lee, Thank you for the question. I suggest replacing the Oven Igniter. If the igniter is not giving off enough volts the valve will not open to allow gas through. Hope this helps!
45 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
August 12, 2017
My oven will not even try and do anything. The stove top works just fine and the timer and all the other buttons on the back splash work just fine. It's just that the oven will not heat up. There is no gas smell and it doesn't click like the igniter is trying to start it. Please help!?
For model number JGBP33BEH5BB
Hi Daniel,
Thank you for your inquiry. It sounds like you are going to want to check the bake and broil igniters and the temperature sensor in your appliance. Test all three parts with a multi-meter to see if they are working correctly. Good luck with your repair.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Brenda
January 10, 2018
I purchased the round oven igniter and it still won't light, what next?
For model number JGBP24BEA2WH
Hello Brenda, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: pressure regulator, dual oven safety valve, sensor assembly, and check the wiring to the ignitor. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Duke
January 17, 2019
The top burners work but the oven and broiler does not,,what part would i need to fix it
For model number RGB526ET1AD
Hi Duke,
Thank you for your question. If the surface burners are working, but not the oven, the issue is the igniter and it will need to be replaced. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
ENOLA
November 11, 2017
My burners work and the broiler works. However, when i turn on the oven to bake and set the temperature to 350, the oven than goes to 100 instead. It does not heat up. Any suggestions would be greatly appreciated.
For model number JGBP79AEV1AA
Hi Enola,
Thank you for your inquiry. If your broiler element is not working and the oven is not heating evenly then There are some parts that you will need to check to see which one is causing the issue. You will need to check the oven sensor, the round style oven igniter and both the bake and broil elements. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Roberta
November 21, 2018
The broiler and the burners ignite but the oven will not heat? I believe i need to replace the ignitor, correct?
For model number JGBP28BEA2AD
Hi Roberta, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
March 26, 2020
No ignition on lower (bake) part. Broiler works fine. No glow on bake ignitor
For model number JGRP20BEJ1BB
Hi Ken,
Thank you for your question. If the igniter is not glowing, you will need to replace the round style oven igniter. The part number listed under your model number for the igniter is PS243425. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
January 21, 2019
From time to time we get a gas smell prior to ignition. Otherwise everything works fine after that
For model number 790.78902003
Hello Michael, thank you for your question. Check the burner tubes for any debris in the tube or the holes where the gas comes out of. Sometimes if the holes are covered with grease or food debris the tube cannot bring gas out in the right flow which causes a buildup of gas before it lights. If it takes a bit more time to light and you get the smell of gas that usually means the igniter is not functioning each time properly. We would recommend replacing the oven igniter to fix this issue. The bake igniter is IGNITOR Part Number: PS2581803 and the broil igniter is IGNITOR Part Number: PS2581802. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Wes
September 11, 2017
Hi, this is Wes again, regarding the wall oven with the pilot light situation. I've sent the model number to see if that helps, once again it doesn't light and I'm not sure if it's the igniter or not, but it will not even light. Can't even light the pilot light, thanks
For model number JGRC14GEP1BG
Hi Wes,
Thank you for the question. If you can smell gas but it is not lighting I suggest replacing the igniter.
Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
August 30, 2017
My gas stove and oven will not get a Flame at all it clicks but never gets a Flame?
Hi Kathy,
Thank you for your inquiry. It sounds like you will need to replace the igniter. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
