241804-1-S-GE-WB2X10016         -Flat Style Oven Igniter with Wire Harness and Bracket
241804-1-S-GE-WB2X10016         -Flat Style Oven Igniter with Wire Harness and Bracket 241804-2-S-GE-WB2X10016         -Flat Style Oven Igniter with Wire Harness and Bracket 241804-3-S-GE-WB2X10016         -Flat Style Oven Igniter with Wire Harness and Bracket

Flat Style Oven Igniter with Wire Harness and Bracket

PartSelect Number PS241804

This igniter is lighted by the spark switch to produce a flame to ignite the oven.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Compare At

    $130.18
  • You Save

    $21.70
  • Your Price

    $108.48
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

5 of 6 people found this instruction helpful

Parts Used

  • Flat Style Oven Igniter with Wire Harness and Bracket

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerMaurice from Overland Park KS

Oven not up to temperature; shuts off before temp set

Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Flat Style Oven Igniter with Wire Harness and Bracket

Level of DifficultyDifficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerGENE from HEBRON OH

Igniter

NO PROBLEM GETTING TO IGNITER IN OVEN TO REMOVE FROM HOLDER. DIFFICULT TO DISCONNECT IGNITER AT REAR AFTER REMOVING DRAWER. JUST HARD TO GET TO. BROKE ONE OF THE PLUG-IN RECEIVERS SO HAD TO CRIMP ON A NEW ONE. THIS WAS A HINGED PAIR THAT RECEIVED THE IGNITER LEAD AND ANOTHER LEAD THAT WENT TO ANOTHER PART.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Flat Style Oven Igniter with Wire Harness and Bracket

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSteve from Flanders NJ

Oven igniter dead

First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3