This part is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the others. This tab fits into the v-shaped slot. The burner cap is found under the grate, and it protects the burner. If your current burner cap is damaged or missing, this is the part that replaces it. Before you begin this repair, be sure that the burner cap and the grate are cool to the touch. To replace the burner cap, simply lift the grate off and remove the cap. Replace it with the new cap to complete your repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Burner Cap - Medium
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB29K10004 replaces these:
AP2027244, 256247
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Pamela W - October 23, 2020
Verified Purchase
Great part!
Quick and easy!
★★★★★
★★★★★
James S - August 8, 2018
Verified Purchase
Burner cap replacement
The new part fixed the problem, and the ordering/shipping went very smoothly.
★★★★★
★★★★★
Sharon M - February 20, 2018
Verified Purchase
Cap is too light
The cap fit but the gray was too light. My grates and caps are all dark gray.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
we had damaged the burner cap
just removed the old burner cap and put on the new one.
Gary from Indio, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henry
December 7, 2019
How to take out and replace warm zone button
For model number wfe540hoes2
Hi, before you replace the warm zone switch button on your range be sure to unplug the power
cord. Use a Phillips head screwdriver to unthread the screws securing the upper rear access panel. Pull the panel down to detach, use a small flat-head screwdriver to depress the front locking tabs to
release the warm zone switch assembly then push the assembly forward. You will need to depress the rear locking tabs to release the bezel and the old button. To install the new warm zone switch button first make sure the switch itself is properly positioned in the control panel, then align the new button slide on the bezel, snap the bezel on to the switch and snap the assembly into the panel. Reinstall the upper rear access panel by inserting the upper tabs under the control panel, then align the bottom tab with the lower access panel. Replace the screws to secure. with the repair completed plug the power cord back in and your range should be ready for use. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
