Average Repair Rating: 4.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
converted from lp to natural gas
took lp spud out and put in natural gas spuds.not sure what to do with oven yet it does not work now.
Don from Pr du Roche, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Convert burners from LP to Natural Gas
Remove the burner grills. Lift the stove top and lift the burners and unscrew the existing orifice spuds using pliers. Screw on the new (Natural gas) orifice spuds.
DORTHY from PORTER, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
October 26, 2017
This is a GE range that was converted to lp. I need to have it converted back to natural gas and the original gas orifices were not kept. What orifices do i need to convert back to natural gas?
For model number GE jgb810set3ss
Hi David,
Thank you for your inquiry. The natural gas orifices are sold with the burner tubes. Here are the part numbers for the orifices that you will need, PS8767176, PS3510845, PS3510847, PS3510849 and PS3510850. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
March 6, 2018
What parts do I need to convert from lp to ng for a Hotpoint stove and what are the processes. Model # rgb528er4wh.
For model number RGB528ER4WH
Hi Kevin, Thank you for the question. You will need to replace the cooktop Orifice spuds, Part Number: PS240946 on each burner and adjust the valve in the oven. You will need a 1/2" open end wrench, turn the orifice down or clockwise 2 1/2 to 3 revolutions. In some cases turning the orifice hood all the way down can damage the LP pin inside the valve and can create ignition and noise issues so be careful not to turn it all the way down. Turn the oven on and let the burner cycle for a minute or two, then adjust the air shutter on the burner tube until you have a nice colored blue flame with little or no yellow tipping of the flame. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pam
August 7, 2018
Need to convert this from lp to natural gas. Can't find the orifice spuds that came with the stove. There are 5 burners. (1)20,000 btu, (1)11,000 btu, (2) 9,100 btu and (1)5,000 btu. What do i need? Thanks so much. Also, do i need a different line kit leading to the stove?
For model number PGP986set4ss
Hi Pam,
Thank you for your question. To convert back to natural gas, you will need to replace the burner tube assemblies. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
What S
February 24, 2018
What part do i need to change this from propane gas to natural gas
For model number Jgbc20gev2wh
Hello, Thank you for your inquiry. The natural gas orifice spud for this model is part# WB28K7, then you would adjust the safety valve, and flip the cap on the pressure regulator. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.