239843-1-M-GE-WB27X1160-High-Voltage-Diode.jpg
239843-1-S-GE-WB27X1160-High-Voltage-Diode.jpg 239843-2-S-GE-WB27X1160-High-Voltage-Diode.jpg

High Voltage Diode

PartSelect Number PS239843

This diode has a 1/4" female connection and an eyelet.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $75.85
  • You Save

    $12.64
  • Your Price

    $63.21
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

15 of 18 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerEugene from Standish ME

Would blow the internal 15amp fuse when pressing the start button

Used the trouble shooting guide and wire diagram found inside the microwave (thanks GE). Found the HV capacitor and diode had shorted. Replaced the capacitor and diode........works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 24 people found this instruction helpful

Parts Used

  • High Voltage Diode

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench set

CustomerLuis from Plano TX

Noise and no heat on microwave oven.

First, I waste $65 by calling some "REPAIR" service. They showed at home and charge me that just to tell me
Second, I researched on the web and ordered a part, which was not the issue. I waste abnother $72
Third, I found Part-Select and got the right answer: the Diode was the problem. Ordered the part form Part-Select and it FIxed it !!!

Note: I did not buy a new microwave because this one is mounted on the wall and it will cost me +$800 just the lowest price.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 16 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerMichael from Olive Branch MS

Blowing 15 amp fuse when hitting power button

Looked at schematic to see which parts became active when the power button was pushed. From there used meter to determine diode was open and capacitor was shorted. Biggest trouble was dis-assembly/assembly required to get to electrical parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3