239525-1-S-GE-WB27X10388        -FUSE
239525-1-S-GE-WB27X10388        -FUSE

FUSE

PartSelect Number PS239525

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • No heat.
  • Won’t turn on.
  • Touchpad does not respond.
  • Compare At

    $7.94
  • You Save

    $1.32
  • Your Price

    $6.62
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

332 of 437 people found this instruction helpful

Parts Used

  • FUSE

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKim from Cliffside Park NJ

Microwave completely stopped working

Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.

Help other customers find the most helpful instructions.

Were these instructions helpful?

74 of 116 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerSteven from Manassas VA

Microwave not heating

Rmovd top vent screen. Removed control panel. Removed fuse cover panel. Replaced fuse. Removed housing of door switches. Removd wiring from door switches and and removed door switches from housing. Replaced with new switches and re-connectd wiring. Re-attached panels.

Help other customers find the most helpful instructions.

Were these instructions helpful?

35 of 62 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJacob from Brewster NY

Some smuck put a metal object in company microwave

found fuse blown and heat damage to TCO sensor.

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 56 people found this instruction helpful

Parts Used

  • FUSE

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerRalph from Brandon FL

I diagnosed the problem incorrectly: Based on a previous repair.

The old fuse is perfectly good. The new ones arrived within a day.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4