http://www.partselect.com/Schematics/GE/GE_Thumb/00105897i01.gif
See part 16 in the diagram

CONTROL ERC III B

PartSelect Number PS239239

This part works with the following brands: GE, Hotpoint & Kenmore.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1
 

11 of 12 people found this instruction helpful

Parts Used

  • CONTROL ERC III B

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDaniel from Cockeysville MD

Error code "f7" on keypad indicated problem

Unplugged range (very imortant!) Removed screws to rear access panel, then removed screws holding ERC panel in place. Disconnected all electrical inputs and ribbon connector. Replaced all electrical inputs and ribbon on new ERC as they were on original ERC. Replaced ERC screws and rear access panel screws. Plugged range back into outlet. Viola! Couldn't have been easier. Unfortunately, 3 days later the error code returned indicating problem could be keypad or dirty ribbon. I have cleaned ribbon w/pink eraser and am waiting to see if error code returns. If so, probably should've tried that first to determine if it was just a bad keypad, which would've been a lot cheaper to replace for the get go....live and learn!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1