Quick Question!

Have you ever purchased from PartSelect.com before?

239148-1-S-GE-WB27X10037        -Diode Cable
239148-1-S-GE-WB27X10037        -Diode Cable http://www.partselect.com/Schematics/GE/00106785i01.gif

Diode Cable

PartSelect Number PS239148

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • No heat.

Compare At

$19.72

You Save

$3.29

Your Price

$16.43
Order within the next 7 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

76 of 168 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Wrench set
Customer: Christopher from Chruchville, MD

Dishwasher would not pump water out. Othre appliance was advantium oven.

Removed the dishwasher. Simple to remove and replace the pump, flapper, and o-ring. Reinstalled dishwasher. It worked!
The GE Advantium was another story. Replaced the Magnetron, diode, and capacitor. Oven still did not work so I took it to the dump. No more GE!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 19 people found this instruction helpful

Parts Used:
  • Diode Cable
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Robert from Dayton, NV

Microwave would not heat food

First and most important - unplug AC power 24 hours before service.

I removed the vent cover above the main door, then I removed the screw which holds the control panel in place, unplugged the main connector on the control panel so I would have enough room to work, removed grounding screw from the DIODE ASSY, pulled connector off the CAPACITOR with pliers, installed new DIODE ASSY.

After installation of DIODE and the control Panel, I plugged in the AC power and allowed the CAPACITOR to charge - this takes about an hour or so, then test. Works perfect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Wrench set
Customer: Mark from Bushwood, MD

Microwave went totaly blank - no power

Disassembled the front cover, found slow blow fuses, then replaced with microwave fuses 250V-20Amp. Utilized a few fuses to pin point the problem, Microwave functions all worked except the express feature, made an assumption after using a tester that it was the high voltage capacitor and the diode that attaches. Replaced both, plugged in and tested. Worked! reinstalled the unit. Sucessfull for the past month.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers
Customer: Joanne from Osterville, MA

No heat

very hard to do!!!!! Did not solve the problem. Had to order additional parts to try to resolve problem

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4