5 of 6 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
CustomerRichard from Fleetwood PA
Oven bake element would not heat up.
Removed two phillips screws in bottom front edge of control panel.
Lifted panel up and removed from back of panel.
Took electrical connections off of the circuit board and removed the four screws that held it to the
Carefully remove the plastic clock overlay from the old unit and attach to the new one.
Mount the unit on the panel and reconnect the wire connecters.
Remount the contol panel to the oven.