19 of 27 people found this instruction helpful
- CLOCK/OVEN CONTROL (ALSO ORDER CLOCK PLATE ITEM 18 OR 18A)
Level of DifficultyReally Easy
Time to do repair:1- 2 hours
ToolsNutdriver, Screw drivers
CustomerNopadon from Arden, NC
Heat come up about 150 degrees and stop.
I removed the whole unit out by pulled the plug at the bottom and pulled the unit out, unplug the power cord , turn the gas line off, separate gas line from the stove. I pulled the unit out to have more room for me to work on it. I took the top part out and right hand side panel out. Now you can see the old clock/oven control (ERC II C). I wrote down the color of wire to the lettering on the controller board. I pulled the wires out from the old one. Then I put wires back to the new clock/oven control. I reinstalled and put the gas line back and plug in power cord. I test the unit. It is work very fine.