http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/YYHJK7ZN.gif
See part 18 in the diagram

Cabinet Rack Track - Left Side

PartSelect Number PS2377059

This part is mounted to the side of dishwasher cabinet and helps the rack slide back and forth.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $76.94
  • You Save

    $12.82
  • Your Price

    $64.12
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Cabinet Rack Track - Right Side

Part Number 2377058

This part is mounted to the side of dishwasher cabinet and helps the rack slide back and forth.

$62.34
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

8 of 12 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerMark from Wellington OH

Top cabinet racks broken

Unsnap the end covers on the old sliding rack and slide the basket assembly out. This leaves the frames for the rack slide on the right and left side of the unit. Both sides snap out by twisting them downward. Remove the plastic brackets on the new racks by twisting them off. Snap new rack slide frames into the corresponding side of the diswasher. They are marked with an "up" arrow. Unsnap end covers on new rack slide frames and reinsert the basket assembly into the frames. Snap end covers over rack slides to trap the rollers into the slide. When you are finished you should dissassemble the strainer unit on the bottom of the dishwasher by the pump and remove all the small plastic balls that were part of the rack assemblies. They fall out and clog up the chopper assembly and pump.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

Customerbarry from granby CT

Top rack of dishwasher jamming

I purchased two new top rails and replaced them. It was a breeze. The racks actually "popped out" and I popped in the new ones! problem solved, I will buy from you again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCarolyn from Garland TX

Rack tracks were broken

Loosen screws and pulled out dishwasher,
remove screws on the old rack tracks and screwed new rack tracks on. Pushed back in dishwasher and tightened screws. Very easy
to replace.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3