Quick Question!

Have you ever purchased from PartSelect.com before?

2376034-1-S-Whirlpool-8206232A-Light Bulb - 40W
2376034-1-S-Whirlpool-8206232A-Light Bulb - 40W http://www.partselect.com/Schematics/Whirlpool/JWDV3CGT.gif

Light Bulb - 40W

Compare At

$3.83

You Save

$.64

Your Price

$3.19
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS2376034
Manufacturer Part Number 8206232A
Manufactured by Whirlpool

This exterior light bulb for your microwave is 40W and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair.

This part works with the following brands: Whirlpool, Estate, Amana, Roper.

This part works with the following products: Microwave.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 5 reviews What's this?
1-5 of 5
 

107 of 154 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W
Level of Difficulty: Difficult
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Deborah from Millersville, MD

Light bult needed to be replaced

The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb

Help other customers find the most helpful instructions.

Were these instructions helpful?   

60 of 85 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joseph from Pembroke, MA

Bulb "burnt out"

Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Leslie from WILLINGBORO, NJ

Light bulb was out

It was a bit awkward because the microwave is mounted over my stove. I had to twist around and install the bulb and then replace the cover. It was a bit uncomfortable. It took me about 10 minutes to complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench set
Customer: Glenn from BRISTOW, VA

Blown dual element lightbulb

The hard part was trying to find the light bulb locally. The locally sold light bulbs were either too long, not dual element or not powerful enough. So I ordered the light bulb straight from PartSelect. When it came time to install the new light bulb I carefully removed the screw holding the plate in position so as not to loose it in my gas stove. I needed the mirror to line up the light bulb and screw it in. Once it was in I verified operation and closed up the plate being careful not to drop the screw into my gas stove. Problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Light Bulb - 40W
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: DANNY from SAINT JOHNS, FL

Burned out light in microwave

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS2376034
Manufacturer Part Number: 8206232A
Brand Model Number Description
AmanaAMV3204VAB0Microwave - Hood Combo
AmanaAMV3204VAQ0Microwave - Hood Combo
AmanaAMV3204VAS0Microwave - Hood Combo
WhirlpoolGMH3174XVB0Microwave - Hood Combo
WhirlpoolGMH3174XVB1Microwave - Hood Combo
WhirlpoolGMH3174XVS0Microwave - Hood Combo
WhirlpoolGMH3174XVS1Microwave - Hood Combo
WhirlpoolGMH3204XVB0Microwave - Hood Combo
WhirlpoolGMH3204XVB1Microwave - Hood Combo, 2.0 CU. FT.
WhirlpoolGMH3204XVB2Microwave - Hood Combo, 2.0 CU. FT.
WhirlpoolGMH3204XVB3Microwave
WhirlpoolGMH3204XVQ0Microwave - Hood Combo
WhirlpoolGMH3204XVQ1Microwave - Hood Combo, 2.0 CU. FT.
WhirlpoolGMH3204XVQ2Microwave - Hood Combo, 2.0 CU. FT.
WhirlpoolGMH3204XVQ3Microwave
WhirlpoolGMH3204XVS0Microwave - Hood Combo
WhirlpoolGMH3204XVS1Microwave - Hood Combo, 2.0 CU. FT.
WhirlpoolGMH3204XVS2Microwave - Hood Combo, 2.0 CU. FT.
WhirlpoolGMH3204XVS3Microwave
WhirlpoolGMH5184VAQ0Microwave - Hood Combo
WhirlpoolGMH5184XVB0Microwave - Hood Combo
WhirlpoolGMH5184XVB1Microwave - Hood Combo, 1.8 CU. FT.
WhirlpoolGMH5184XVQ0Microwave - Hood Combo
WhirlpoolGMH5184XVQ1Microwave - Hood Combo, 1.8 CU. FT.
WhirlpoolGMH5184XVS0Microwave - Hood Combo
WhirlpoolGMH5184XVS1Microwave - Hood Combo, 1.8 CU. FT.
WhirlpoolGMH5184XVT0Microwave - Hood Combo
WhirlpoolGMH5184XVT1Microwave - Hood Combo, 1.8 CU. FT.
WhirlpoolGMH5205XVB0Microwave - Hood Combo
WhirlpoolGMH5205XVB1Microwave