2375886-1-S-Whirlpool-7737P245-60-Knob - Chrome
2375886-1-S-Whirlpool-7737P245-60-Knob - Chrome 2375886-2-S-Whirlpool-7737P245-60-Knob - Chrome 2375886-3-S-Whirlpool-7737P245-60-Knob - Chrome http://www.partselect.com/Schematics/Maytag/55247.gif

Knob - Chrome

PartSelect Number PS2375886

Manufacturer Part Number 7737P245-60
Manufactured by Whirlpool

Sold individually. This knob accepts a D-shaped shaft.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Will Not Start.
  • Touchpad does not respond.
  • Compare At

    $14.26
  • You Save

    $2.38
  • Your Price

    $11.88
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 28 reviews What's this?
1-5 of 28
 

467 of 476 people found this instruction helpful

Parts Used:
  • Knob - Chrome
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Denise from Los Angeles, CA

The knob broke during my housekeepers last kitchen clean up.

Opened the package and put the new knob on my fan for my stove top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

372 of 376 people found this instruction helpful

Parts Used:
  • Knob - Chrome
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Barbara from Union, WV

The burner knob was cracked.

I simply remove the broken knob just like I do when cleaning. To place the new knob, I matched the flat part of knob opening with the flat part of the shaft, returning to off position.

Help other customers find the most helpful instructions.

Were these instructions helpful?

91 of 158 people found this instruction helpful

Parts Used:
  • Knob - Chrome
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Clifton from Missouri City, TX

Knob was broken

This wasn't really a repair, I just replaced a stove top knob. I usually keep a few spares on hand because although they look like they are made of medal they are really made of plastic. The best thing about your service was price and speed of delivery. My local supplier would have had to back order, and he would have charged me more than twice as much for each knob. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

79 of 144 people found this instruction helpful

Parts Used:
  • Knob - Chrome
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers
Customer: Craig from Tucson, AZ

Having replaced 3 knobs already, I was still experiencing splitting of the knob shaft where it fits over burner control shaft

To reinforce 5 knobs after replacing 3 knobs earlier using the "simple" replacement of knobs: My 19 year old daughter mixed a 15 minute two part epoxy glue and coated the outside of the plastic knob shaft (first placing a q-tip in the center of the shaft opening to protect from glue entry into knob engagement channel). She then wrapped the wire in a close spiral so each turn touched the previous one (like a spring), leaving the wire ends long enough to twist around knob ears to hold firmly in place during cure of glue. She then coated the outisde of the wire turns with more epoxy to encase the wire and secure wire in place. After curing, she cut the wire ends off so they were flush with knob shaft and installed knobs on burner stems. Hopefully a permanent solution as you shouldn't have to modify replacement parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

75 of 142 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Donnette from Fresno, CA

Cracked burner know

If you remove knob and sleeve remains, you have to use needle nose pliers to remove. Pull straight up, don't wiggle back-and-forth too much. If you put too much pressure on glass-top, it can crack. Prying is DANGEROUS on glass-top stoves.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 28