http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/56127.gif
See part 12 in the diagram

Burner Knob - Stainless

PartSelect Number PS2375871

This part accepts a D-shaped shaft. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start.
  • Gas igniter glows but will not light.
  • Touchpad does not respond.
  • Compare At

    $24.53
  • You Save

    $4.09
  • Your Price

    $20.44
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 24 reviews What's this?
16-24 of 24
 

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRonald from Sumas WA

Electrode would not spark

removed two screws, lifted the element, disconnected wire, removed one screw that holds electrode, replaced anf assembled

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCharles from Grenada MS

Broken knobs

First I removed the old damaged knobs by pulling upward on the knobs. Then I replaced the damaged knobs with the new knobs being careful to align the male and female connection. After installation I tested each burner for proper operation. As a final test, I asked my wife for her opinion. We're happy!

Charles & Dorothy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerJohn from Mesa AZ

Burner nob broken

Popped the old one off and installed the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerSherry from Mentor OH

Knobs on the new jennair range I just purchased started to melt and when they were called they did nothing about it. I had to call and get new knobs at my cost.

Very easy, just removed the old ones and the new ones just clicked on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerThomas from Potomac MD

Ignitors with very weak sparks (2 burners)

Should have read the partselect instructions first 1.) unplugged range 2.) unscrewed (torque screws - good thing I had some) burners - one screw was corroded into the top and snapped - will require a drill to remove and replace metal screw. 3) slid electrical wire from contact 4.) unscrewed (with phillips) Burner Electrode assembly (also corroded - took some force) replaced electrode assy and reversed steps. Works perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 7 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMary from Granite Bay CA

My knob broke

There is really nothing to replace a stove knob. What I was impressed with was the speed in which the knobs came to my house, the very next day from the day I ordered them.
Thanks a ton!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTamara from Crown Point IN

Original knobs were broken. They are only plastic afterall and no did not hold on the stem to turn on and off without duct tape.

Simple. I went online, found the replacement part, ordered 5 new knobs. They came within 4 days and I put them on. Easy as can be. I saved this site so I can go back to it if I ever need to. Wonderful! Thank you..

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Encinitas CA

Melted knobs, replaced

Ordered from Sears.com....under impression that we would get 4 knobs for about 20.00, to our surprise we got only one knob for 20 dollars plus shipping.
Your website was wonderful... have three knobs for the same price as one from Sears.
Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 6 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Alta Loma CA

Knobs split, was getting inaccurate flame

Remove old knob. Replace with new knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-24 of 24