http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/55402.gif
See part 12 in the diagram

Burner Knob - Stainless

PartSelect Number PS2375871

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows but will not light.
  • Will not start.
  • Touchpad does not respond.
  • Compare At

    $24.53
  • You Save

    $4.09
  • Your Price

    $20.44
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 24 reviews What's this?
1-15 of 24
 

461 of 468 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from South Lake Tahoe CA

Burner knobs melted, burned out electrode

R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

442 of 522 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSusan from Grand Junction CO

Broken control knob for cooktop

found the picture of the piece I needed on your website, ordered it and have it almost immediately. very pleased with the service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

192 of 344 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJanet from Chula Vista CA

Continually having to replace the knobs because they are made of cheap plastic and split down the side for whatever reason I don't know. I do not know what I am doing to cause them to split down a side. Why can't they be made of a heavier metal?

took old one off with fingers
replace with new one with a new knob again

Help other customers find the most helpful instructions.

Were these instructions helpful?

144 of 210 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customermara from Lake Shore MN

Burner knobs on cooktop melted

I have been trying to find replacement knobs for months. I was having difficulty locating the model # on my actual cooktop and was told time and time again without it I would be out of luck. The # on the knob apparently meant nothing, go figure. This website actually had a picture!!!!! Eureka!!! I located my knobs! Great price, simple to put on, this website made my day. Thanks!!!!! :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

151 of 295 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerEugene from Chicago IL

Cooktop burner knob contacted griddle, partially melted.

Pulled off old, repositioned new burner knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

145 of 288 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDennis from Iredell TX

Simple to change, but you do need a torx bit screwdriver.

Remove screws holding burner down, invert and remove screw in igniter. Reverse to reinstall.

Help other customers find the most helpful instructions.

Were these instructions helpful?

143 of 284 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKit from Temple TX

Burner knob was broken

I removed the old knob and inserted the new one, which matched exactly. Cooktop is now like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

145 of 348 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerFRED from CLARKSBURG NJ

Retainer spring inside knob was lost from cleaning.

Just pulled off the old knob and pushed on the new knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerCarol from Riverside CA

Shafts on burner knobs had split.

I thought I had ordered metal knobs but it appears that I got plastic ones. I’m thinking they’ll be fine, the others had just split the shaft that sits on the control stem, but I’m hoping this won’t happen again. I do have a repair question regarding one of the sealed burners on my Jenn-Air. The igniter switch sounds like it’s working but the burner won’t light without putting a match to it. Do you have any ideas of what could be wrong?
Thanks for your help,
Carol Lance

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerElena from Chandler AZ

Broken burner knob

just replaced with a new one. very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGreg from Syracuse UT

Burner knob melted

Pulled the old one off, pushed the new one on. Super easy. Simple ordering, quick processing and delivery. Way to go PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMelvin from San Marcos CA

Old burner knobs had cracks

Removed the old burner knobs by hand, and replaced them with four new knobs.....

Real Easy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSid from Saint Francisville LA

Plastic burner knobs cracked

Pulled off the old and pushed on the new. Took less than a minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

Customerbill from spokane valley WA

Electrode clicked but failed to light burner

I first tried to remove the torx screws only to have them break off..soooo as with most home repairs it grew into a bigger task. 1) unhooked the gas line and unplugged the unit 2) place the unit upside down on workbench 3) used a socket set to remove the hex screws that held the top on 4)removed all the other burners and disconnected electrical wire connected to the igniters. 5) Removed the top 6) uses pliers to remove the screw parts left in the burner base (wd-40 and lock wrench)..Replaced the old gaskets 7) put the top back on and screwed the top back on (make sure you pull the igniter wires through the top before securing it) 8) Reseat and screw in the burners using a torx bit

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Burner Knob - Stainless

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBrian from Rancho Mirage CA

Being dumb enough to buy jenn-air appliances

I removed the old knob and replaced with a new one from the plastic package. Biggest challenge: opening the new plastic package. It if very nice to know you have many of the parts I will need over the next 20 years.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 24