2375653-1-S-Whirlpool-7406P272-60-Bake Element
2375653-1-S-Whirlpool-7406P272-60-Bake Element http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/49853.gif

Bake Element

PartSelect Number PS2375653

This bake element is found on the bottom of the oven.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Oven not heating evenly.
  • Compare At

    $59.16
  • You Save

    $9.86
  • Your Price

    $49.30
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 15 reviews What's this?
1-5 of 15
 

18 of 20 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKathy from Powder Springs, GA

Baking element burnt out

It was so easy....a cave man could do it.

Power off to oven, 2 screws, swapped the elements, 2 screws back in. Keep the original screws. The only delay we had was the right screw was a little hard to "start".
Once we had it tightened up, we turned the breaker back on and wah la....we had our oven back!

Shipping was much faster than expected!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerTom from Elba, AL

Electronic display was too dim to read and the top baking element was burned out.

I removed two screws to take the control panel off.
The electronic display is held in place with four screws which are easily removed with a nut driver.
The wiring work is extremely simple.
To replace the element, I removed the oven racks, took two screws out, disconnected the two wires, then replaced the element by reversing the process.
Both jobs took less than 20 minutes and that includes two trips to the breaker box in the basement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMark from Millbrook, AL

Element burned out

Piece of cake. Removed two screws holding the element in place and pulled the element out to expose two wires connected with friction clips. Connected the new element and screwed it back in place. My wife got back to baking and now I am enjoying a different piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench (Adjustable)

CustomerLinda from Erving, MA

Heating element not working

I removed the 2 screws in the back. You have limited room to work but it is enough. The screws were somewhat hard to come off so I used a rachet set as well as a screwdriver. Pulled the element forward and tilted it up. The prongs has to be wiggled out. Went back together very easily. Wouldn't have tried it myself if I hadn't read the posts here. It was REALLY that easy!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDon from Kansas City,, MO

The bake heating element shorted out on the oven. Called several appliance dealers in kansas city and the said that it would take two weeks to get the part.

I ordered the bake heating element from Part Select on March 23rd and paid the small amount for overnight shipping. Believe it or not I received the heating element the next morning at 10:00 am. I do not know how they did this since I live in KC MO and they are in PA i believe. They show you a diagram of the part you need with the part number on their web sight. I opened the well packaged item and took out two screws on the existing bad element and took it out, BY THE WAY MAKE SURE THAT YOU SHUT OFF THE POWER TO THE OVEN. I neglected to turn off the breaker because I thought the oven would have to be on to have power. This was a mistake because the heating element shorted when I tried to pull it out.
This was entirely my fault. I shut off the breaker and installed the new heating element in about five minutes. It worked great and we had our oven back in two days. My wife was very impressed with my electronics experience but I did not tell her everything. I would highly recomend this company. Don

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 15