2371144-1-S-GE-WR55X10956-Main Control Board
2371144-1-S-GE-WR55X10956-Main Control Board 2371144-2-S-GE-WR55X10956-Main Control Board

Main Control Board

PartSelect Number PS2371144

This board is located on the back of the refrigerator. This board controls the operation of the unit.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Freezer section too warm.
  • Will Not Start.
  • Fridge too warm.
  • Compare At

    $178.61
  • You Save

    $29.77
  • Your Price

    $148.84
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

21 of 29 people found this instruction helpful

Parts Used

  • Main Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRichard from Bradenton FL

Top of freezer not cooling properly. Ice cubes melting and allowing ice cycles to form at rear of freezer.

Replaced main control board, located at the rear of unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 15 people found this instruction helpful

Parts Used

  • Main Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerScott from Overland Park KS

Ice maker wasn't working right and the freezer wasn't cold enough

-Unplugged the refrigerator
-Removed panel on the back of the refrigerator, bottom right.
-Took pictures of existing main board so I would know where everything plugs in.
-Unplugged and removed main control board
-Installed new main control board
-Plugged everything in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

  • Main Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerDon from Herndon VA

Ice would melt intermittently creating an ice wall on the back or side of the freezer.

Replacement of the Main Control board was relatively easy, although some of the connectors were reluctant to separate.

The new control board appears to have solved the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

  • Main Control Board

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerRichard from Florence OR

Overflowing ice maker creating glacier on back wall

No instructions came with the replacement control board. A notice that this part supercedes the original circuit board part number would have been helpful, although it is noted on the web site IF you drill into the parts list deep enough. Diagrams on the web site gave a general location for the circuit board.

Swap-out of the boards was relatively easy, although some of the connectors were reluctant to separate.

The new control board solved the overflowing ice maker issue.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4