BBB A-Plus
2370502-1-M-GE-WD12X10304-RACK-SLIDE-END-CAP.jpg
2370502-1-S-GE-WD12X10304-RACK-SLIDE-END-CAP.jpg 2370502-2-S-GE-WD12X10304-RACK-SLIDE-END-CAP.jpg

RACK SLIDE END CAP

PartSelect Number PS2370502

This part attaches to the rails, for the upper rack, to prevent the dishrack from sliding all the way out.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly
  • Door latch failed
In Stock

  • Compare At

    $.73

  • You Save

    $.12

  • Your Price

    $0.61
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 5 NEXT > 61-64 of 64

 

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerShantha from Alpharetta GA

The upper rack was falling and the roller was missing on the lower rack

I installed the roller wheels on the lower rack and the wheels and end cap on the upper rack and the shelves looked like new after I was finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMary from Champaign IL

Dishwasher upper rack came off breaking dishes

I had put up with this for over year- I disconnected what was left of the damaged front rollers. Snapped into place the two new rollers at the front, and the missing end cap. NO MORE BROKEN DISHES!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

    • RACK SLIDE END CAP

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerBRIAN from Keller TX

Somehow the upper rack end cap went missing. I needed to replace the cap so the rack would not pull all the way out and fall down.

I used needle nose pliers. I bent the stainless steel guide arm out so that I could insert the end cap. Once the end cap was installed I used the same needle nose pliers to "pinch" the guide arm back tight around the end cap. The end cap had premanufactured "notches" to hold the end cap in place once the guide arms are pinched down.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

    • RACK SLIDE END CAP

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLinda from LaPlace LA

Left end cap had broken off on dishasher top rack

It was so easy-just popped the end peice in and it fit perfectly. I also ordered 2 knobs for my dryer which was only one year old, they were also so easy to put on.. I received my parts 2 days after I ordered and because of some problems with my computer had to talk to the operators and was very pleased and happy with their help and with the parts that I ordered. I wil always order my parts from Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 5 NEXT > 61-64 of 64