Safety Valve and Regulator Assembly Specifications
The safety valve makes sure that no gas is released until the igniter gets enough power to ignite the gas range and the regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB19K10041 replaces these:
AP4484216, 1556010, 183D8410P003, WB19K10007
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James W - December 19, 2020
Verified Purchase
Oven repair.
I installed the safety valve on the stove and turn it on and it worked well.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Neither oven nor broiler burner would light, no gas coming from burner.
Remove the warming drawer entirely. Remove all five nuts securing the valve and regulator assembly. Loosen (do not remove the nuts entirely) the burner assembly itself to give some wiggle room above the valve and regulator assembly. Also remove the single screw that holds the "collar" in place just above the gas outlet that services the o
... Read moreven burner. This should provide the margin of room you need to remove the valve and regulator assembly because it's a tight space. Working entirely in this cramped space (the warming drawer) will take time and patience. Don't drop any screws because you might create a whole load of more work for yourself. Loosen the brass nuts holding the gas lines in place. Then you have to maneovre the old equipment out. Just reverse all the steps to install the new equipment. Apply Harvey's to the brass nuts and re-attach the gas lines BEFORE you firmly attach the equipment using the five nuts. Don't tighten the brass parts all the way, just hand tight at first. Re-attach the equipment using the five nuts, then tighten up the brass parts with a wrench. Don't over tighten. Re-secure the screws that hold the burner in place. Then test the equipment. If all good, wait for the oven to cool, then do a final check that all the screws are firmly in place. Voila.
Read less
Michael from Chicago, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Strong odor of butane- gas leak at regulator
I turned the gas off and disconnected the stove & unplugged it from electricity. Pulled the stove out & removed the part. I ordered the regulator from PartSelect and it arrived promptly in 2 days. I replaced the Kit-Valve & Regulator with no problem. I changed the orfice jet from natural gas to butane. It works well.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
December 30, 2017
My oven has been in storage for over 10 years and I hooked it up and did a self cleaning but when the time went off it never shut down. I finally just shut the gas off. Can you help?
For model number JGBP35WEJ1WW
Hello Jason,
Thanks for your question. This issue likely arises from the electronic control board, part number PS953679. We would advise replacing it.
I hope this helps.
Hi Greg, thank you for the question. Based on our research, the issue you mentioned with your model indicates a faulty igniter glowbar, part number PS11725182, that needs to be replaced. It ignites the gas to light the oven broil burner. Glad to be of help!
I used a gas detector to detect gas leaking from three of the burners and from the oven. What part should i replace?
For model number JGB920SEF2SS
Hello Richard, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS2370032. Good luck with your repair!
Was this helpful?
Thank you for voting!
Russ
January 26, 2020
When i set the temp on the oven control and then push start the oven takes a few minutes to turn on and sometimes with a small bang like there is a gas build up before it ignites. This does not happen every time. The glow plug seems to come on and get hotter. Why does it see that the gas is building up?
For model number JGBP855EL1SS
Hello Russ,
Thank you for your question. Our sources suggest replacing the flat style oven igniter kit under part PS231280 for your model to fix the gas issues. We hope this helps.
Upon turning on the stove there is a small gas igniter is lit and has been replaced what the temperature of the stove will not rise even when it says it’s 350° it’s not 350° in the stove so the stove is not coming to full temperature no matter what temperature you put on the setting the igniter has been replaced I’m thinking the control valve now what are your thoughts
For model number JGB920SEF2SS
Hello Tim, Thank you for the question. We suggest testing the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
Also the stove does not come off the temperature but all four burners on top worked fine I forgot to mention that in my first email thank you
For model number JBG920SEF2SS
Hello Tim, thank you for writing. If all of the surface burners are working fine, then check the Oven Igniter PS231280 or the Burner with igniter PS952996. Good luck with your repair.
