Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Frigidaire/KMGDNG9L.gif
See part 4 in the diagram
http://www.partselect.com/Schematics/Frigidaire/KMGDNG9L.gif

Exterior Door Glass - Black

PartSelect Number PS2369012

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Compare At

$162.55

You Save

$27.09

Your Price

$135.46
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

13 of 15 people found this instruction helpful

Parts Used:
  • Exterior Door Glass - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Stephanie from South Orange, NJ

Shattered glass door front

First, in order to easily access the oven door, I removed it by pulling straight out at the hinges. Then I removed the frame of the broken glass assembly by unscrewing the 2 screws at the bottom of the door and the 2 screws holding the door handle. I fit the new part in place, screwed the bottom 2 screws first, and then lined up the screw holes in the assembly with the screw holes in the door handle and reattached the handle with the 2 other screws. IMPORTANT: ALWAYS USE A MANUAL SCREWDRIVER WHEN WORKING WITH THE GLASS ASSEMBLY...AND DO NOT TIGHTEN THE SCREWS FOR THE HANDLE TOO TIGHTLY (THE GLASS WILL SHATTER IF YOU DO!)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 9 people found this instruction helpful

Parts Used:
  • Exterior Door Glass - Black
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Diane from San Antonio, TX

Replaced shattered glass heat barrier cover for oven. Do not over-tighten the screws or the glass will shatter. This is what happened after I cleaned it.

The glass barrier was easy to replace. All the glass was gone so it was just the metal frame that I had to take off. Then replace with the new one. It came with an attachment on the bottom that screwed into the oven then screwed on top with the handle. Very simple and easy. The only question I had after ordering the part was if I had to reattach the glass to the frame or if the new part already came with the frame. After the part came it, it was obvious.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2