Part Location Diagram of 318122721 Frigidaire REGULATOR
See part F14 in the diagram
Part Location Diagram of 318122721 Frigidaire REGULATOR
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

REGULATOR 318122721

Rated by 1 customer 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 96.62
  Special Order
PartSelect Number PS2368769
Manufacturer Part Number 318122721
Manufactured by Frigidaire
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Electrolux, Kenmore.
Part# 318122721 replaces these:
AP4454240
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.3 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burners would not stay on at lowest settings, Regulator suspected to be the problem
First, I watched a lot of videos on YouTube. All of them were very similar, and had similar repair instructions, doing all the work at the site of the regulator location. The gas supply flex line was easily detached, as well as the line that exited the regulator to feed the stove. The gas inlet nipple, however, was not willing to unscrew. My regulator was held on by Phillips head sheet metal screws, which were easy enough to unscrew, so I just removed the regulator, still attached to the gas connection nipple. I went to my shop and placed the regulator in a vise, careful to clamp either end, not the regulator valve itself, and used a deep socket over the nipple, and had to use a Breaker Bar to loosen the nipple. I cleaned the nipple where Pipe Dope had been used, and applied new sealant, then screwed it back on the the Regulator, once again using the socket and bar. Then I threaded the new regulator body with the sheet metal screws while it was clamped in the vise. (The new regulator was not threaded, and I had to use vise grips to hold the screws while turning them in) After that, installation of the new regulator was relatively easy. I wish Frigidaire had used hex head screws instead of the Phillips. After install, range worked perfectly. PartSelect delivered correct part in a timely manner.
Read less
  • Richard from Springfield, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2368769
Manufacturer Part Number: 318122721
Brand
Model Number
Description
Kenmore
79041093100
Range
Kenmore
79041103100
Range
Kenmore
79078502013
Range
Kenmore
79078503013
Range
Frigidaire
CGDS3065KB1
Range
Frigidaire
CGDS3065KB2
Range
Frigidaire
CGDS3065KF1
Range
Frigidaire
CGDS3065KF2
Range
Frigidaire
CGDS3065KF3
Range
Frigidaire
CGDS3065KF5
Range
Frigidaire
CGDS3065KF6
Range - RANGE
Frigidaire
CGDS3065KF7
Range - RANGE
Frigidaire
CGDS3065KW1
Range
Frigidaire
CGDS3065KW2
Range
Frigidaire
CGDS3065PFB
Range - RANGE
Frigidaire
CGDS3065PFC
Range - RANGE
Frigidaire
CGDS3065PFD
Range - RANGE
Frigidaire
CGDS3065PFG
Range - RANGE
Frigidaire
CGDS3065PFH
Range - RANGE
Frigidaire
CGDS3065PFJ
Range - RANGE
Frigidaire
CGDS3065PFK
Range - RANGE
Frigidaire
CGDS3065PFN
Range - RANGE
Frigidaire
CGDS3065PFP
Range
Frigidaire
CGDS3065PFR
Range
Frigidaire
CPDS3085KF1
Range
Frigidaire
CPDS3085KF2
Range
Frigidaire
CPDS3085KF3
Range
Frigidaire
CPDS3085KF4
Range
Frigidaire
CPDS3085KF5
Range
Frigidaire
CPDS3085KF6
Range - RANGE
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
REGULATOR
$ 96.62
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.