Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug Bills
February 14, 2019
When i plug in the powe an error reading comes up 08 control panel. Do i need to replace this? The only thing i question is when i add pier to the latch the control panel goes blank?Doug
For model number Ewdw650gso
Hello Doug, Thank you for contacting us. Checking the model number unfortunately we do not have this symptom listed, for more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tony
October 18, 2019
My dishwasher dispenser will not dispense the soap i checked the solenoid its ones outok but they told me it was bad i replace the whole unit and soaps dispenser still does not dispense they’re saying it’s a control board
For model number EWDW6505GS0B
Good Day Tony. Thank you for your question in regards to your unit (Model Number EWDW6505GS0B). Based on our research you many need to replace the Detergent Dispenser (PartSelect Number PS11770680). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
Ivan
January 8, 2018
When turned on all lights are flashing.
For model number EIDW6105GS2B
Hi Ivan, Thank you for the question. You will need to remove the bottom panel to check the leak detector. The most common cause for all the lights flashing would be this detector finding a leak. Hope this helps!
Was this helpful?
Thank you for voting!
Joe
July 29, 2019
Machine is sporadically giving error 03 (washer pump) followed by error 11 (drain valve) after such an occurrence and a time out, i'm able to run "drain cycle", set a wash cycle and it completes the entire wash cycle. Looking at the wiring diagram, it appears that if the "mains relay" rs5 doesn't provide line voltage to the wash pump and the drain valve, the controller board determines those devices are not running and posts the error messages. Any thoughts or suggestions?
For model number EWDW6505GW0
Hello Joe, thank you for writing. I would suggest replacing the parts giving the error messages. The Drain Valve is part number PS2331069 and the Circulation Pump and Motor Assembly is part number PS2367869 for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
