Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/GE/00114145i01.gif
See part 21 in the diagram
http://www.partselect.com/Schematics/GE/00114145i01.gif

INF SWITCH CONTROL (2000

Compare At

$35.41

You Save

$5.90

Your Price

$29.51
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS236751
Manufacturer Part Number WB24T10026
Manufactured by GE

This part works with the following brands: General Electric, Kenmore.

This part works with the following products: Range, Microwave Oven Combo, Wall Oven.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

3 of 4 people found this instruction helpful

Parts Used:
  • INF SWITCH CONTROL (2000
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Wrench (Adjustable)
Customer: manuel from key west, FL

Left front burner would not turn on

Removed panel to gain access, removed wires from switch from burner that was not operating and attached them to switch for burner that was working. Burner worked, problem identified. Replaced bad switch with new switch. Problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • INF SWITCH CONTROL (2000
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Wrench (Adjustable)
Customer: Karen from BELLE ISLE, FL

The control knob on the burner stopped allowing you to adjust temperature and would on turn the burner off when turning counter clockwise

I turned off the breaker, removed the control knobs from all of the burners there are plastic knots on each control knob that needs to be removed (once loosened they can easily be turned by hand). You can then just lift the out piece off. You need to remove 4 knots to release the control panel so you can access the control know. I removed the 2 screws in the old control know, there are 4 wires that need to be pulled to disconnect. I wrote down the order in which the colored wires were connected . I then removed the old part and reversed the process

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • INF SWITCH CONTROL (2000
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench set
Customer: Vilas from Hanover Township, PA

Installed a new switch

Took off cover plate and removed screws from housing to switch. Connected each wire from old switch to new one. No problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS236751
Manufacturer Part Number: WB24T10026
Brand Model Number Description
Kenmore91146392300Microwave Oven Combo
Kenmore91146393300Microwave Oven Combo
Kenmore91146394300Microwave Oven Combo
Kenmore91146399300Microwave Oven Combo
Kenmore91195852991Range
Kenmore91195857991Range
Kenmore91195859991Range
Kenmore91195982990Range
Kenmore91195982991Range
Kenmore91195987990Range
Kenmore91195987991Range
Kenmore91195989990Range
Kenmore91195989991Range
General ElectricJB905BH1BBRange - Electric
General ElectricJB905BH2BBRange - Electric
General ElectricJB905BH3BBRange - Electric
General ElectricJB905BH4BBRange - Electric
General ElectricJB905KH1CCRange - Electric
General ElectricJB905KH2CCRange - Electric
General ElectricJB905KH3CCRange - Electric
General ElectricJB905KH4CCRange - Electric
General ElectricJB905SH1SSRange - Electric
General ElectricJB905SH2SSRange - Electric
General ElectricJB905SH3SSRange - Electric
General ElectricJB905SH4SSRange - Electric
General ElectricJB905TH1WWRange - Electric
General ElectricJB905TH2WWRange - Electric
General ElectricJB905TH3WWRange - Electric
General ElectricJB905TH4WWRange - Electric
General ElectricJB940AB1AARange - Electric