Surface Burner Switch - 8 Inch - 2500W Specifications
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat intensity. The knob to adjust the heat setting mounts on the shaft of this swtich. The burner knob is sold separately. If your large surface element will not turn on, or you cannot adjust the heat intensity, you may have a broken or damaged surface burner switch. Be sure you disconnect your range from the power source before you begin this repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Surface Burner Switch - 8 Inch - 2500W
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start | Oven is too hot
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB24T10025 replaces these:
AP2024072, 769692, WB24T10025
Customer Reviews
Average Rating:
★★★★★
★★★★★
52 Reviews
4.8
Filter By Rating:
5 Stars
43
4 Stars
8
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nola R - 24 days ago
Verified Purchase
It worked
Came in a reasonable amount of time - right part - installation was easy and problem solved.
★★★★★
★★★★★
Deanne E. D - January 10, 2024
Verified Purchase
Eady repair
The part was in great condition and is working fine
★★★★★
★★★★★
Gary P - December 14, 2023
Verified Purchase
Worked good
Worked as expected.
★★★★★
★★★★★
Janet K - October 10, 2023
Verified Purchase
Worked as expected! :)
Part worked great.
★★★★★
★★★★★
Larry T - June 8, 2023
Verified Purchase
Working just fine switch
Working great thank you
★★★★★
★★★★★
Brenda B - November 30, 2022
Verified Purchase
Great part, easy repair
The service was excellent and the part came quickly. The repair was easy and successful.
★★★★★
★★★★★
Robert O - October 22, 2022
Verified Purchase
Easy repair.
It was the right switch and was a easy repair. I had watched a short video just followed it then made the repair. Saved me several dollars
★★★★★
★★★★★
Bill J - May 6, 2022
Verified Purchase
Stove fixed. Wife happy. Money saved.
Wife said, "Stove's broken. We need a new one." Priced new stove. Priced new part. Ordered part, repaired stove, life is good.
★★★★★
★★★★★
Alexis T - April 25, 2022
Verified Purchase
Easy repairs
My appliance is back in working order. Excellent service and fast delivery.
Thanks
★★★★★
★★★★★
Wallace H - November 30, 2021
Verified Purchase
Easy install, with quality parts.
The switch was exact match to the one replaced. It took about twenty minutes and stove was up and running.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The burner coil had shorted out and actually burnt a hole in my non stick pan and after I replaced that, it would not heat up again. I actually swapped the wires from the back burner, but the small coils use a different watt switch and it would barely boil water with the big coil. So I ordered this
First turn off the breaker, and test with my milti meter. Raise the top panel where the coils are and prop it open high enough to use a screwdriver to open the front panel. Then unscrew the three screws on the inside of the top panel, then open the oven door and you will see 4 screws across the bottom of thefront control board panel
... Read more and two more on each side of the sides of the panel facing straight up. Unscrew those 6 screws and then pull the front control panel forward and out. You might need something or someone to hold the panel, I just let the wires hold the weight, but not highly recommend. Then pull the switch knob off and behind it there are two little bitty screws that hold the switch in place. Unscrew them and pull the switch out of its place. I put the new switch close to the old one and just used the needle nose pliers to unplug one wire at a time and plug it in on the same place as the old one. Then screw the itty bitty screws in the front that hold the switch in place and put tbe knob back on. Reposition the front panel back into place abs screw in the 9 screws removed for disassembly. Now would be a good time to clean under the burner panel if you haven’t done so yet ( it gets pretty nasty under there). Then put your burner top back down into place and turn your breaker back on. You can either test with your multi meter or like I did, just put the burner on high and watct the coils glow. Such a beautiful sight. Easy fix.
Read less
sherman from OPELOUSAS, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front right burner would obtain the right heat setting.
Went to You Tube, found the appropriate segment. "Wa La" the problem was solved. Burner is working the way it is supposed to.
John H. from JACKSONVILLE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface element switch failed
Top front sloping sheet metal panel with all controls and plastic end caps has to come off. Need 2 people, one to hold it while other replaces switch. Problem was getting screw holes on bottom ends lined up and cuts from sheet metal edges. Ten minutes to get it apart, 40 to get it back together. New switch works fine.
William W. from Seattle, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner at full red hot power despite setting
After removing power from the range, I pulled the unit out for better access to the rear. I carefully pulled all four knobs off the front of the control panel. Next, using a short phillips screwdriver, I removed two screws from the front bottom of the control panel. On the rear of the control panel, there are four screws to loosen, now th
... Read moree whole panel is free to remove toward the front of the unit. The burner switches are held onto the panel with two screws that are located on the front under where the knob had been. The wires are all connected to the switch with crimp type connectors. These are on tight, but can be removed carefully with pliers. Before doing so, I took a picture on my phone to ensure I replaced the wires in the correct order. Everything goes back together in reverse order. This is a good time to clean behind and under the whole stove. The whole process took around 20 minutes.
Switch started arcing in the dial range of 2 to 8 in about a year.
Pulled the range out and unplugged it. Removed the back panel. Removed one wire at a time and plugging it in on the new switch. unscrewed the existing switch from the front panel (Two screws). Screwed the new one in, replaced the panel, plugged in the range and tested it. The new switch was a perfect OEM replacement and worked perfectly.
Brian from HONEA PATH, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was burned out
Took back off and replaced.
BRINDIA from DOVER, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner stopped working & light indicator remained on
It took my son very little time to install control switch. Using a screw driver he removed the back panel directly behind burner units & replaced the control switch. Very easy.
Cynthia from BALDWINSVILLE, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When the burner was turned on it would be on high for any setting. In fact, the burner would be warm to touch even when the switch was in the off position.
I turned the power off at the circuit breaker, pulled the stove out from the wall, and removed the plug. I removed the top back panel, and took the burner switch out by unscrewing the 2 screws in the front of the panel. I used pliers to remove the wires one at a time from the bad switch and put them on the good switch. I replaced the new
... Read more burner switch on the front panel and also, replaced the back panel. I put the plug back in the socket, pushed the stove against the wall, and turned the power on at the circuit breaker.
Read less
Daniel from CEDARVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
left front Burner not working
Unplug stove from its wall outlet. Remove two screws securing rear panel. Pull off knob to Burner control which was damaged when surface heating element shorted out. Remove two screws securing control knob. When removing control knob be sure the wires removed from the old control knob are put back on in the same position on the
... Read more new knob. Reinstall the control knob, and reinstall screws. To remove heating element. Just lift it out and unplug and just plug the new one.
Ask our experts a question about this part and we'll get back to you as soon as possible!
26 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
July 23, 2017
One of the 8" stove top elements will not lower the heat when turned down. Will a bad surface burner switch cause this problem?
For model number GE JBSO7M1WW
Hi Jim,
That is a great question. If you not able to turn the heat down on your surface burner then the issue is with the switch. I hope this helps. Have a great day!
46 people found this helpful.
Was this helpful?
Thank you for voting!
Ernest
February 2, 2018
8" burner stays on Max heat ...does not turn off
For model number JBP66WOB2WW
Hi Ernest,
Thank you for your question. If the burner is staying on maximum heat and it will not turn off, then the issue is with the burner switch that controls it and it will need to be replaced. I hope this helps. Thank you and have a great day!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
August 9, 2019
I turn on my 8” burner and there is a little pop noise , and the burner seems to be over heating . It’s already ruined one of my stainless steel boiling pots . I thought it might be the surface element switch . What do you think ?
For model number JBP23DR1WW
Hello Jim, thank you for inquiring. It could be either this 8" Surface Burner Switch part number PS236750, the 8" Surface Burner Element itself, part number PS243922, or the Surface Burner Terminal Block Kit part number PS232606 for your model. I hope this helps and good luck with your repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
September 21, 2017
Burner light stays on. Checked continuity on burner switches. Short between black lead (removed) and other 2 leads on one switch. Is it safe to use the other burners with one disconnected while waiting for replacement?
For model number JBBP24DM1WW
Hi Doug,
Thank you for your question. Yes, it would be able to use the other burners on your stove. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Andrea
April 6, 2018
Both of the large burners will randomly go to red hot regardless of the heat setting. Do i need to replace the burner switch?
For model number JBP23DR2BB
Hello Andrea, Thank you for your inquiry. We would recommend checking the switches and surface burner terminal block kits-which is the wiring to the element. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Barry
July 29, 2021
Unable to control the heat on the 8" burners. They boil water on the low setting. The burner switches and the burners have been replaced and I still have this problem.
For model number JB258DM2BB
Hello Barry, Thank you for the question. With both the Switches and Element replaced, this could be an issue with the Wiring. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lewis
April 25, 2018
One large eye will sometimes go to Max heat. Is this in the eye switch?
For model number JBP23DR2CC
Hi Lewis,
Thank you for your question. It could be your switch or the element itself. I would suggest testing your element to make sure that it is working correctly. You would be able to test that part with a multi meter. If your burner is fine then it may be your switch that is the issue. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dwight
December 5, 2018
How to install # ps236750. 8 inch burner switch?
For model number ABS45DF1BS
Hi Dwight, thank you for your question. We have a video underneath the part information above. Here is the link: https://youtu.be/7hoJqv_pQvg. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Wanda
June 26, 2021
I replace switch but burner get extremely hot on low, what could be wrong.
For model number JB250DF1WW
Hello Wanda, Thank you for the question. We suggest checking the wiring for the switch and element. Make sure there is no damage or wear. If the wiring is good, you may need to replace the element. We hope this helps!
Finding that the burner heat is erratic and there is little control of mid to low heat.
For model number JBP23SP1SS
Hello Paul, Thank you for the question. Normally this is an indication the switch that controls the Burner is defective and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
