2 of 5 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:More than 2 hours
CustomerDuane from Cape Canaveral FL
Washer lid was rusting out
I removed 3 of the 4 hinge screws. The fourth, I had to drill out. Rust had frozen it. I used 'liquid wrench', let set for about 2 hours before I used the drill. After, drilling out the screw, It was an easy job.
I recommend that the 3 pieces attached to the lid be installed prior to shipping. I almost ruined the door closed post trying to remove it from the old lid.
Had I damaged that, my washing maching would have been out of commission for another week awaiting delivery of that part.