Make sure you haven't got the discount earlier.
Bake Burner Orifice Tubing - Lower 7507P395-60
Fits your 66578002803 Range!
Fits your 66578002803 Range!
PartSelect Number PS2366014
Manufacturer Part Number 7507P395-60
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Maytag, Kenmore, Jenn-Air.
Part# 7507P395-60 replaces these:
74011296
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
GARY
February 18, 2023
Since Thanksgiving, our lower oven has apparently been offering a slight BOOM when turned ON, after 30 seconds or so. I thought it may be an igniter not getting hot soon enough. I replaced the igniter, and the BOOM remains.
My U-Tube research suggested (1) faulty ignition ports on the burner tube, (2) an igniter that is not heating-up properly due to a faulty resistance, and (3) an igniter that needs an adjustment to be closer to the ignition ports.
Before I look into all of these, do you have any other thoughts? Note that the burner tube ports that I can see look perfectly clean and not rusted; I will need to remove the igniter again to view the ignition ports. I also learned that the igniter and gas valve feeding the burner tube are wired in series, as a safety measure. ALSO, the oven does NOT boom after the initial ignition when the oven is first turned ON.
Thanks in advance for any thought you may have, as my next move is likely a new burner tube and/or gas valve.
For model number MGR6775BDS
Hello Gary, Thank you for your inquiry. When you hear a boom in your gas oven while it is preheating, what you are hearing is a delayed ignition of the gas. How it is supposed to happen is that the igniter lights a small amount of gas to start the process. However, when that doesn’t happen and the gas builds up, it caused the small boom of it igniting all at once. Most of the time, it can be caused by a dirty igniter, a clog in the burner tube or low gas pressure-which may need to be checked by a gas specialist. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2366014
Manufacturer Part Number: 7507P395-60
Manufacturer Part Number: 7507P395-60
Brand
Model Number
Description
Back to Top
Bake Burner Orifice Tubing - Lower
$
114.30
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.