2365151-1-S-Whirlpool-12656106-Pantry End Cap - Left Side
2365151-1-S-Whirlpool-12656106-Pantry End Cap - Left Side 2365151-2-S-Whirlpool-12656106-Pantry End Cap - Left Side http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/56069.gif

Pantry End Cap - Left Side

PartSelect Number PS2365151

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $24.95
  • You Save

    $4.16
  • Your Price

    $20.79
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Pantry End Cap - Right Side

Part Number 2365144

Sold individually.

$20.46
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 77 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerJennifer from Woolwich Twp., NJ

Plastic pin that hinges the pantry lid on snapped off

First, let me say that it only broke because a teenage house guest that didn't know how to open the lid, yanked on it.

I, the lady of the house, repaired it myself. I took out the wide pantry drawer, the two smaller drawers and 1 glass shelf, unscrewed the glider rail (2 screws), unscrewed the old panel (4 nuts). Put the glider on the new panel, screwed the new panel on, put the shelf and drawers back. No Problem. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerralph from hemet, CA

Broken lid holder on left hand pantry door

removed crispersn glass under crispers. took out pantry drawer. removed three hex head screws , and removed pantry door holder.
replaced with ordered part and put everything back together. works great. also gave me a chance to really clean under the crispers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerWilliam from Eagle, ID

The hinge pin on the pantry door broke off.

First I removed the pantry drawer, one crisper drawer and the pantry door. Using a nutdriver I removed three screws holding the pantry end cap in place. Once the end cap was removed I used a screw driver to remove two screws holding the drawer slide mechanism. Installation of the replacement end cap required doing everything in reverse order. The repair went smoothly and took about 45 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerEdward from Elk Grove, CA

Support stem for llift drawer had broke

It was so easy to install, no problems. And it works just like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerJohn from New Port Richey, FL

Broke the plastic pin that the meat and cheese drawer covers

First I bought the wrong size left end cap. Then I bought the correct one. Measure and check the size first, learn from my mistake! This is the french door Refrigerator with the freezer on the bottom. So first remove the lift up door and the slide out drawer that is held up by the left end cap. Then, take out the two drawers, the glass shelve and the two front and back brackets that hold up the glass shelf. Then remove the three screws and when they are removed put straight up on the front of the the end cap to release the slide on hold in the very front. When replacing insert the two back tabs and slide onto the hold in the front. Do not over tighten the 3 screws and then replace the two bars, the glass, and the two drawers.

Help other customers find the most helpful instructions.

Were these instructions helpful?